The Honda PCX / Forza / ADV150 / SH Forums

UPS is rocking today, the YSS shocks going on later this week...

Dr Pulley sliders on - it took about 30 min due to the EXCELLENT DIY thread over in the DIY/tech section. No surprises, I agree you can keep the lowers on with a lot less screws...LOL....the variator nut was not too tight, and easily broke free with a breaker bar. The OEM rollers I pulled out (USA P...

In the middle of swapping out my sliders… What millimeter is the big variator nut that pulls the whole thing off , is it 21 mm? Sorry to ask I've searched and I have a shop manual coming but it's not here yet

thanks in advance

Any new bike sold by an authorized service point is to do all recalls and service actions prior to delivering the bike.

So again, no cool pics but so easy to do: removal of windshield to silica coat the shield, it came with a few dealer supplied micro scratches... 1. So easy, garnish pulls towards you after screws come out , and 4 bolts release the shield. Shield Procedure: 1.Orbital/med pad for both sides w/ meguire...

Sure, should be a bunch of stuff happening this week, lotsa stuff coming:

http://www.hondapcx.org/viewtopic.php?f=2&t=4640

I have the bikerbitz coming this week in polished/gray… Will post pics on my build thread as soon as I get them on.

you will have to show a vid and explain (slider change) if that's a guard homie don't slide on the muffler much. Sorry, variator dr pulley slider change ....two mods done in aft. OH! been there done that :lol: you will enjoy if you get the right weights. I put this kit in myself and discovered 12g ...

you will have to show a vid and explain (slider change) if that's a guard homie don't slide on the muffler much.

Sorry, variator dr pulley slider change ....two mods done in aft.

homie wrote:

Jge64 wrote:Thanks, I think I like the malozzi best....

Did you get a price on the malozzi... I was liking that one too

Ordered thru scooterparts co, like $300 i think, it's mounting tues, with a slider change also....

I just used a dremel cut off wheel and cut below the plate bracket - 5 min

Yep, this air cleaner element is just for the belt. The regular air cleaner is inside the air cleaner housing above the left crankcase cover. You need to remove 7 screws to remove the cover to get at the element. This element cannot be cleaned and should be replaced every 12000 miles according to t...

So reading here, this air cleaner is not the air intake for the motor? And its just for the belt?, then what is filtering the air into the engine?… Where is that filter?

Per mel's experience, ill be mounting the 13 gm Dr Pulley sliders this coming tues, will report back with results.

I have a Shoei RJ I ride with, but the dealer owned me a $ amt, so I picked up this helmet. I was very impressed and this makes a great 2nd helmet. I like: shield in front locks down bill covers all the parts when you use it as an open face drop down sun visor is killer good fit, removable everythin...

Id replace it, cant be much $

But std air cleaner kits are at any parts store.

So today was the first arrival of many parts I expect from the vendors here, so here's the muffler garnish and a DIY fender bob below plate. Be careful with the garnish, it is very thin, and explains why it's an inexpensive part. It bolts right to the plastic, total garnish. It'll come off with anot...

Ill just choose an oil per the manual specs, prob 10-40 M1, and change it often. Its gotta be the easiest drain ive seen at a quart total , and no filter. So ill get a 5qt jug from amazon and change it every 3-5 months. I dont mind that sched at all. Bike used year round every day.

Nice!

In florida too, scooter heaven......

:P Hi and Welcome to our forums! So, it's Goodbye Vino...Hel-lo PCX! Sweet! You won't be sorry, you'll love it! It sure will be much lighter and more nimble than rolling your MP3 around...and like you said, great for a daily commuter. About adding the D1136ST screen, I put one on my 2015 recently, ...