The Honda PCX / Forza / ADV150 / SH Forums

First one is +/- 9300 Pesos

ScooteringAbout wrote: ↑Wed Feb 18, 2015 2:57 pm Would also love the 125 catalog.

https://pec.thaihonda.co.th/Application ... rtApp.aspx

So stock the pcx had 18.5g rollers. I believe the European PCX comes with 15g weights as the riders are heavier than Asian riders. who get 18g. If you want to know how much your original weights weigh put them in a self-addressed envelope go to the post office and ask how much it costs to post. The...

If you have a dig for Dr. Pulley they recommend their weights be 15-20% lighter than stock. Of course, you can go more. If you add a stronger torque/contra spring then you could go up a bit. This for reference only: As it is a 150. . https://www.motorcycle.my/wp-content/uploads/2017/09/dr-pulley-mal...

OK best we got here years ago with 125 using J Costa was 122kph which is 76mph. I assume with no screen. 100kg rider would lose about 3 kph against a 60 or 75 kg rider so make it +/- 74 mph. Does your Polini have 9 weights or 6? The box in your picture has 8 🤔 Stock PCX has 15g weights so 6 x 15 =90...

78 mph indicated is pretty good for a standard 125 bike with tuned variator. 75 would also be good. As we don't know your weight or height. I.e. are you small and ride tucked🤔 Did you fit the whole Polini kit? According to my info the kit in that picture is for a SH125/150. OK they share the same en...

Has anyone played with their CVT? It used to be that European PCX had different weights to the Asian version. Stock Asian version has 19g weights.

Why not just upgrade to an aftermarket Variator and Driveface? {/quote] What is the diameter of this driveface? Maybe the driveface has a different angle which will force the belt further out but the stock engine will still have the same Hp. to overcome wind resistance. Of course the engine has to ...

Hello, everyone! I have a question regarding the front pulley set for the PCX 160. It measures 127mm in diameter. Best regards, Gabriel Have you put a caliper across the pulley to come up with 127mm. If so I can add it to my database. The PCX has a 13" rear wheel as opposed to the Click having...

I believe you should get at least 65. How heavy are you? As a start, fill the tank with Shell V-Power if there is a shell near you.. It has extra detergents and will clean out the fuel system. Length of time in the system, not how many miles you ride. Did you replace the air filter? I'm a firm belie...

As you mentioned 157cc I assume this is a PCX160 with 15.8hp. Theoretically from my aerodynamics formula and results on 125/150 you should be good for about 79 mph. (revs allowing). This is with J.Costa (ie. tuned variator|) and a freer flowing exhaust. NB. J Costa has a 13 deg pulley angle. vs. sto...

https://www.hondapcx.org/viewtopic.php?t=4373 A big job. Might be easier to see if you are using all the CVT pulley first and address that. There are after-market drive faces that are slightly larger. 120mm vs stock 117mm. Which will give you a bit more. Do you have a tach.? So you know if the engi...

So it started eventually? Will it start today? Go for a decent ride and come back and see what happens tomorrow.

Sidestand switch? Just cycle the sidestand a few times.

Damn. I thought I contributed I must have closed the page before the upload was complete. You need to discover what size injector you have. It is written on the side. Likely an H or 5A or... INJECTOR NAMES & FLOW RATES FOR KEIHIN B-TYPE INJECTORS: • A INJECTOR      (6-HOLES / 90CC FLOW RATE) LIN...

As I cannot edit. !!!!

Update discovered that PCX150 may have a 9600 RPM electronic limit

maninmanaus wrote:so I looked at a possible riding route on Google, and it can be done. You have to go via Spain, France, Italy, Slovenia, Croatia, Bosnia and Montenegro, but it can be done.

Go to Bari and get the ferry that will save about 500kms and maybe can be one of your overnights.

Sorry to bump. It's isolation you know. I believe rev limit on a PCX is 9300 rpm. I don't know what RPM one gets valve float/bounce. The valve thing is mechanical whereas the limit is electronic so while a different ECU will fix one it won't fix the other. If you are routinely getting valve float yo...

What is the current wisdom on reducing the weights and/or Dr. Pulley

^ not forgetting of course that some tires are larger in diameter so IRC tires which are larger give more mph.

Pcxdemon wrote:Anyone still here?

I'm still here.

ScooterAddict wrote:Mel46
Out on the Interstate going down a long grade 76mph.

About 3 -5 kph slower than a 125 with J Costa. Depending on your weight.