Honda's own windscreen upgrade - anyone?

[dustin91]

I didn't know Honda made their own windscreen... available on Amazon(US) for only twice what any Puig or Givi seems to go for: http://amzn.com/B00DSPEEVA.

Anyone ever install one?

[gn2]

Think it could be made by Ermax, the Forza one from Honda is.

[dustin91]

Thanks. Ermax seems a bit more tricky to get hold of in the states... and I meant to be sarcastic about how much it costs!

[beegmouse]

They threw one in free when I bought mine.

Very good quality. But not worth the price over a Givi

[cfrobw]

I bough my PCX used, it had 1400 miles on it. It also had the Honda full screen on it. They either gave it to the lady who purchased the bike, or she purchased it and had it added to the bike.

[Indyglow]

I bough my PCX used, it had 1400 miles on it. It also had the Honda full screen on it. They either gave it to the lady who purchased the bike, or she purchased it and had it added to the bike.

What do you think of the Honda screen? Any buffeting issues at higher speeds or anything you don't like about it? Any pictures of it on your bike?

[cfrobw]

Indyglow

I'm not sure, what you mean by buffeting? Do you mean like the windshield fluttering or vibrating at top speeds?

[Indyglow]

Indyglow

I'm not sure, what you mean by buffeting? Do you mean like the windshield fluttering or vibrating at top speeds?

Does the wind come over the top of the screen right at your helmet and hit so hard your eyes bobble around in your head, or your head bobbles around on your neck, or anything like that? This is the problem lots of people have with the short Givi screen at higher speeds. You are one of only a few people who have the actual Honda screen, so it will be great to know what you think of it and if you notice any problems using it.

[cfrobw]

Here the windshield is off, but the other parts were put back to show what has to be removed.

IMG_0070.JPG (101.28 KiB) Viewed 1993 times

Remove the left side screw

IMG_0071.JPG (112.89 KiB) Viewed 1993 times

Remove the right side screw

IMG_0072.JPG (115.52 KiB) Viewed 1993 times

carefully unsnap the left side

IMG_0073.JPG (83.07 KiB) Viewed 1993 times

carefully remove the left side

IMG_0076.JPG (112.34 KiB) Viewed 1993 times

carefully remove the left side

IMG_0077.JPG (84.95 KiB) Viewed 1993 times

Carefully snap the left side clip out of its hole

IMG_0078.JPG (100.26 KiB) Viewed 1993 times

Front cover removed

IMG_0079.JPG (117.82 KiB) Viewed 1993 times

Frond of Honda PCX windscreen accessory

IMG_0080.JPG (99.34 KiB) Viewed 1993 times

Right side of Honda PCX windscreen accessory

IMG_0082.JPG (129.66 KiB) Viewed 1993 times

Left side of Honda PCX windscreen accessory

IMG_0081.JPG (144.35 KiB) Viewed 1993 times

Rear side of Honda PCX windscreen accessory

IMG_0086.JPG (77.87 KiB) Viewed 1993 times

right side stock windscreen mounts

IMG_0087.JPG (94.85 KiB) Viewed 1993 times

left side stock windscreen mounts

IMG_0088.JPG (88.92 KiB) Viewed 1993 times

snap the windshield bracket in on the left and right sides

IMG_0091.JPG (129.36 KiB) Viewed 1993 times

right side of mirror in place

IMG_0092.JPG (117.44 KiB) Viewed 1993 times

left side of mirror in place

IMG_0093.JPG (132.15 KiB) Viewed 1993 times

4 Bolts with rubber washers

IMG_0094.JPG (131.54 KiB) Viewed 1993 times

Bolt in the right side bolts

IMG_0095.JPG (139.5 KiB) Viewed 1993 times

Bolt in the left side bolts

IMG_0096.JPG (125.82 KiB) Viewed 1993 times

Snap in the right side of the cover

IMG_0097.JPG (143.72 KiB) Viewed 1993 times

Snap in the left side of the cover and replace the two screws removed at the beginning.

IMG_0098.JPG (150.11 KiB) Viewed 1993 times

The installation is finished

IMG_0102.JPG (169.83 KiB) Viewed 1993 times

[cfrobw]

Indyglow,

To answer your question, the first day I rode my PCX, I drove it 15 miles out and 15 miles back on the Interstate at 60. (My bike was used by 2 months, had 1400 miles on it.) There was what you would call buffeting that day. Its the only time it occurred. I think I was leaning to far forward towards the windscreen. I felt like I was in a wind tunnel, my helmet was vibrating on my head like crazy. See the attached photo.

IMG_0102.JPG (184.71 KiB) Viewed 1990 times

After examining the bike I found that there is a huge opening at the bottom of the windscreen in the front, part of the design of the bike. It allows wind to rush straight up the inside of the screen. I believe this is what caused my helmet to vibrate. I haven't had the problem since that day. I changed the way I sit. I don't put my face close up to the windshield like I did that day.

Rob

[Indyglow]

Thank you for all the info, especially the pictures! One last question---do you look through the screen or over it? Okay, one more last question--how tall are you? I'm only 5'3" and would like to be able to see over a screen rather than have to look through it. Maybe the better question would be, what is the length of the screen from top tip to bottom tip?

[cfrobw]

I look over it. I'm 6'1". If you look at the last few pictures, you will see that the screen is about 4 to 5 inches taller than the mirrors. If you wish, I can measure from the dash straight up to get the height and take a photo.

[cfrobw]

I didn't know Honda made their own windscreen... available on Amazon(US) for only twice what any Puig or Givi seems to go for: http://amzn.com/B00DSPEEVA.

Anyone ever install one?

Dustin, I'm not sure about the GIVI windscreen, but the Honda windscreen is made from polycarbonate lens material, like scratch resistant eye wear. This could be why its pricier, otherwise its just the Honda name.

[Indyglow]

I look over it. I'm 6'1". If you look at the last few pictures, you will see that the screen is about 4 to 5 inches taller than the mirrors. If you wish, I can measure from the dash straight up to get the height and take a photo.

Yes, thank you, that would help a lot. It's hard trying to figure out how high the screen is just by looking at the pictures.

[cfrobw]

I look over it. I'm 6'1". If you look at the last few pictures, you will see that the screen is about 4 to 5 inches taller than the mirrors. If you wish, I can measure from the dash straight up to get the height and take a photo.

Yes, thank you, that would help a lot. It's hard trying to figure out how high the screen is just by looking at the pictures.

According to my measurements its 15.35 inches tall from where the cover over the handlebar meets the dash.

See image below.

IMG_0116.JPG (152.96 KiB) Viewed 1858 times

[Indyglow]

Thank you so much! That measurement is VERY helpful.

[Mel46]

If I remember correctly, when I put our Givi windshield on, the holes on the windshield that line up with the windshield brackets was actually drilled through the Plexiglas itself, which means that the hole you had the problem with isn't as large with a Givi because it is closer to the body. My wife is only 5 ft tall but was getting buffeted when she had the smaller Givi windshield on, so we went up in size and now have the tall Givi windshield. She sees through it instead of over it, but the buffeting is gone.

[cfrobw]

If I remember correctly, when I put our Givi windshield on, the holes on the windshield that line up with the windshield brackets was actually drilled through the Plexiglas itself, which means that the hole you had the problem with isn't as large with a Givi because it is closer to the body. My wife is only 5 ft tall but was getting buffeted when she had the smaller Givi windshield on, so we went up in size and now have the tall Givi windshield. She sees through it instead of over it, but the buffeting is gone.

Are you referring to the spot where the holes aren't lined up in the photo above? If so that's just because I was showing them in the picture before I hooked it to the mounting points. It just hooks right in and you re install the bolts.