I have been browsing the performance section for a solid day or two. I am putting a performance parts wish list together. So far I think I narrowed down my list and wondered if any of you would have a good recommendation.
I think a malossi multivar will be the variator of choice with lighter weight 12 or 13's.
My biggest question is about an exhaust. I think to setup as a solid cruiser I want the ncy exhaust. Does it fit on a non-esp? I know of the mild exhaust tone for the vino125, I'm it'd be similar for a pcx125.
Thoughts?
New owner of 2011 non esp needing recommendations
Moderator: Modsquad
-
Tbonestone
- New Member
- Posts: 8
- Joined: Sat Jun 20, 2015 7:19 am
- Year: 2011
- Color: Red
Re: New owner of 2011 non esp needing recommendations
About roller weights.
Do you have the 125cc or 150cc model? I have the Malossi Multivar 2000 in my year 2011 125cc PCX and it came with two sets of rollers (3x10,5g and 3x12,5g). I use the recommended 10,5g rollers as Malossi recommends the heavier 12,5g rollers for 150cc model.
Do you have the 125cc or 150cc model? I have the Malossi Multivar 2000 in my year 2011 125cc PCX and it came with two sets of rollers (3x10,5g and 3x12,5g). I use the recommended 10,5g rollers as Malossi recommends the heavier 12,5g rollers for 150cc model.
PCX 125 (2011), Givi windshield, Malossi Multivar 2000 w/ 10,5g rollers, yellow Malossi clutch spring and Malossi RX exhaust
-
Tbonestone
- New Member
- Posts: 8
- Joined: Sat Jun 20, 2015 7:19 am
- Year: 2011
- Color: Red
Re: New owner of 2011 non esp needing recommendations
Mine, from what I figured out on the "what PCX do i have" thread is a 125-non-esp. So first generation with the almost pyramid shaped air box.