Seat ordered from bikerzbits not fit for purpose!

[Larry David]

I finally got fed up of wet arse due to water dripping down from underneath that hump and ordered a new seat from bikerzbits.

It arrived today. I've put it on only to discover there is a large gap around the side and you can actually see into the under seat area. Upon closer inspection the seat does not have a rubber seal around it like the original one does. I can't even use the seal from this one and put it on the new one as the new one does not have a lip for it to go into.

I've waited a month for this to arrive. I'm fuming!!!

[gn2]

Stick on draught excluder strip...?

[Larry David]

Stick on draught excluder strip...?

Yes I think so. It's a rubber strip that goes all the way around the seat. It pulls out of the gap/lip it's in. However the new seat has no gap for it to be pushed into.

[gn2]

So stick it to the bucket rim?

[Larry David]

So stick it to the bucket rim?

I'm not sure what you mean by bucket rim? The original seat has a gap all the way around which holds in the stick on rubber seal. The custom seat has no gap for it to go into.

[Larry David]

First pic is the original seat. 2nd one is the custom one. There is no gap for the rubber seal to slot into

[Mel46]

This is normal for replacement seats from Asia. Just pull the one from your original seat and it will have enough sticky left to stick it to the new one. I have done this to 3 replacement t seats so far and all have been fine. You could order a new seal if you want to but the one on your original seat works quite well.

[Jge64]

Bikerbitz is great with their support, they have answered me same day. Give them a message if you need to.

[Mel46]

New Seat from Front.jpeg[/attachment]

Underside of new seat.jpg (133.37 KiB) Viewed 1227 times

[attachment=1]

Here is a picture of my newest custom seat. It did not come with a seal. The other picture is the underside after I installed the seal from my original seat.