Hi All
Does anyone know the valve clearances of a 2012 PCX 125, can't seem to find Them anywhere?
Thanks
Johann
Valve clearances
Moderator: Modsquad
Re: Valve clearances
Often specs like that, plug type and gap, etc. are found on a sticker on the side of the underseat bucket.
Fish
Fish
- Limey
- Frequent Poster
- Posts: 561
- Joined: Tue Aug 08, 2017 2:35 pm
- Year: 16 Forza/16 PCX
- Color: Red/Maroon
- Location: Panama City Beach, Florida USA
- Contact:
Re: Valve clearances
Probably incorrect for a 2012 125, but this is for a 2013+ 150:
Check the valve clearance by inserting a feeler gauge
[1] between the valve adjusting screw and valve stem.
VALVE CLEARANCE:
IN: 0.10 ± 0.02 mm (0.004 ± 0.001 in}
EX: 0.24 ± 0.02 mm (0.009 ± 0.001 in}
Check the valve clearance by inserting a feeler gauge
[1] between the valve adjusting screw and valve stem.
VALVE CLEARANCE:
IN: 0.10 ± 0.02 mm (0.004 ± 0.001 in}
EX: 0.24 ± 0.02 mm (0.009 ± 0.001 in}