2020 PCX 150 - Rack Install Question

[coast-jenner]

Greetings,
I want to install a rear luggage rack on my 2020 Honda PCX. How do I remove the rear piece?

[WhiteNoise]

Welcome aboard our forums Please do us all a favor, and add your location to your profile.
Directions to get that done are below my post.
We thank you!

[coast-jenner]

I believe I updated my profile. Thank you for the instructions. Now, how do I remove the red cover to install a luggage rack.? I love this site as I am an old coot on a scoot!!!!!

[WhiteNoise]

Yes you did, thank you.
I've not seen the 2020 model. I'm going to assume it's similar or the same as a 2019 when mounting a rear rack.
Until others chime in here's a video of a 2019 removing a panel to install Honda's rear rack:



That ^ was Easy!!
By the way, we have quite a few old coots on scoots here, so Do stick around!

[you you]

By the way, we have quite a few old coots on scoots here, so Do stick around!

Most of us I think.

[coast-jenner]

Thank you for the post on the luggage rack and the video. Unfortunately the 2020 model is completely different. If you can find a video for that (2020 Honda PSX), I will owe you big time. I cannot find one ANYWHERE. Love this forum. David

[Limey]

By the way, we have quite a few old coots on scoots here, so Do stick around!

I resemble that!

[GregP]

Hey, I resemble that, also!

But I'm having the same problem on my US 2019 PCX. Mine was built in late 2018, maybe they changed the design? Or it is different in the US model? Here is what mine looks like. The panel does not extend down under the seat like the one in the video, it just site on top as you can see in the photo, with no visible method of attachment. I don't want to just pry it off in case there is something somewhere holding it on that I might break. Any thoughts?

Thanks,
Greg

[Docscooter2010]

If you go on YouTube and enter Honda pcx rear luggage rack , there is a video by Red Sweet Potato and he puts a top box on a 2020 pcx . Give it a look as it helped me . Good luck , it’s easier than you think

[Mel46]

https://youtu.be/-R5-NUChD-8

I have a feeling that this same video might apply to the 2019 model.

[GregP]

Red Sweet Potato to the rescue! Yes, that is the correct one for the 2019 PCX, it worked perfectly.

And for anyone who hasn't seen the video, no matter what PCX you own, watch it - it is one of the funniest "serious" videos on YouTube!!!! https://youtu.be/-R5-NUChD-8

Thanks,
Greg

[Docscooter2010]

Red Sweet Potato has some really good reviews One funny guy , pleased it has helped with the top box fitting , and gave you a laugh at the same time .

[HondaC110]

Here's Honda's instructions for removing the piece:

https://cdn.powersports.honda.com/docum ... 35-J01.pdf

Shouldn't be to hard.

[nallanos]

https://youtu.be/-R5-NUChD-8

I have a feeling that this same video might apply to the 2019 model.

Where did you find the mounting plate? Is it the same model as the older ones for the two previous generations?

http://shop.powersports.honda.com/p/rea ... ount-kit-2

[Rickjds]

https://youtu.be/-R5-NUChD-8

I have a feeling that this same video might apply to the 2019 model.

Where did you find the mounting plate? Is it the same model as the older ones for the two previous generations?

http://shop.powersports.honda.com/p/rea ... ount-kit-2

Check here:

http://shop.powersports.honda.com/produ ... 5897?pp=24&