Page 1 of 1
Dyno boost performance chip
Posted: Sun Oct 26, 2014 1:29 am
by gia
Re: Dyno boost performance chip
Posted: Sun Oct 26, 2014 7:26 am
by iceman
Performance may be improved in terms of acceleration and top speed, but the info says it tricks the ECU by pumping in more fuel - greater acceleration, etc, but also states greater fuel economy in the same paragraph - can't all be true.
Re: Dyno boost performance chip
Posted: Sun Oct 26, 2014 3:00 pm
by Urbanfreestyle
This is more than likely a variable resistor with a box and some wires for good measure. NO WAY would i pay that much for it! it goes along the same lines as electronic superchargers and magnets on your fuel lines.
Re: Dyno boost performance chip
Posted: Mon Oct 27, 2014 8:30 pm
by nribeiro
Strange thing is I don't see an IAT sensor in PCX...
Anyone knows?
In my car it's before the TBI but in PCX does not seem to have that sensor before the TBI.
Re: Dyno boost performance chip
Posted: Tue Oct 28, 2014 12:39 pm
by sendler2112
The Honda fuel injection system for all of the sub 300cc bikes is very compact. Honda made a big deal out of this concept when it was proposed back in 2000. They looked around and still saw stinky carbureted bikes everywhere and wanted to bring fuel injection with a narrow band O2 sensor to the masses in Asia and India. The IntakeAirTemp, ThrottlePositionSensor, and ManifoldAbsolutePressure sensors are all surface mounted onto the main board at the throttle plate to make it as compact and inexpensive as possible.
.
I wouldn't buy that ebay thing. If you don't make a major mod you won't gain anything with even a good fuel controller like the Bazzaz. If you add displacement and change cams, you won't gain much without one.
.
http://www.bazzaz.net/index.php/honda/pcx150-12-15
.
http://www.bazzaz.net/index.php/fuel-co ... elf-mapper
.