Page 1 of 1
Windshield removal in Forza
Posted: Tue Nov 18, 2014 1:17 am
by Mortimer
Any suggestions on how to get the Y-shaped red plastic piece out before I can access the screws that attach the wind shield? I first removed the three screws but the piece is holding tight.
Help!
Re: Windshield removal in Forza
Posted: Tue Nov 18, 2014 7:49 am
by dergav
check Fish s entry under the "accessories " section on this forum..full description from a guy who posted on the web as to how to remove and fit a Forza screen...easily done...needs a bit of "force" however to remove the plastic bits....
Re: Windshield removal in Forza
Posted: Tue Nov 18, 2014 5:31 pm
by fish
dergav wrote:check Fish s entry under the "accessories " section on this forum..full description from a guy who posted on the web as to how to remove and fit a Forza screen...easily done...needs a bit of "force" however to remove the plastic bits....
Yes, the description is there...but would call it a lot of things - before I called it "easy" to remove!
Please do not try this if the temp is cold....that might snap some plastic bits.
Blasted thing hangs on for dear life! until you get it off the first time ...and put something on the tabs to lube things for the next time!
Fish
http://myforza300.wordpress.com/2013/09 ... position=0
Re: Windshield removal in Forza
Posted: Tue Nov 18, 2014 6:54 pm
by stryder123
Takes force soooo, may the F O R C E be with you.
Re: Windshield removal in Forza
Posted: Wed Nov 19, 2014 2:37 am
by Mortimer
fish wrote:
Yes, the description is there...but would call it a lot of things - before I called it "easy" to remove!
Please do not try this if the temp is cold....that might snap some plastic bits.
Blasted thing hangs on for dear life! until you get it off the first time ...and put something on the tabs to lube things for the next time!
Fish
http://myforza300.wordpress.com/2013/09 ... position=0
That was very helpful!