The Honda PCX / Forza / ADV150 / SH Forums

Hey boyos,

I've got my new rotor and brake pads ready to go on, but I want to check some things with you gurus fist.

From my Googlies, Maddiedog says 31ft/lbs for the rotor botls (WOW!) and 44ft/lbs for the axle nut.
Since it's a sensitive part of the bike, can anyone please tell me the torque values for the caliper assembly?

Other than that, I think I just need to clean the pistons before pushing them back in before reassembly.
Is there anything else I need to know? Apply grease to the back of the pads or anything weird like that?


Cheese, Gav.

According to the 2013 - 2017 service manual, caliper pin, 13 lbs-ft (18 N-m). Axle nut, 44 lbs-ft (59 N-m).

Rickjds wrote:According to the 2013 - 2017 service manual, caliper pin, 13 lbs-ft (18 N-m). Axle nut, 44 lbs-ft (59 N-m).

Thanks. Does the manual have the torque settings for the two big bolts on the caliper?

chicaboo wrote: Thanks. Does the manual have the torque settings for the two big bolts on the caliper?

22 lbs-ft (30 N-m)

Awesome. This is pretty much what Haynes recommend, too.
Except they also say to apply copper grease appropriately.