How-To VIDEO: Shock Upgrade
Moderator: Modsquad
-
- New Member
- Posts: 4
- Joined: Mon Sep 25, 2017 2:20 pm
- Year: 2013
- Color: Red
- Location: Scottsdale, AZ.
How-To VIDEO: Shock Upgrade
I was intrigued by the shock upgrade articles referenced here and then came across this:
https://www.youtube.com/watch?v=MZRL7EyF1aU&app=desktop
It's in a foreign language but beautifully presented by a fine mechanic,
The key here is that only one body panel is removed in the process - simple! No exhaust removal and no luggage compartment extraction is required,
I followed the above instructions in upgrading to YSS shocks on my 2013 PCX 150, adding some technical information and converting to a slide show which some may find more helpful than a video.
http://www.pindelski.com/Honda%20PCX%20 ... pgrade.pdf
45 minutes if you are not taking photographs. And boy, is it worth it!
Enjoy!
https://www.youtube.com/watch?v=MZRL7EyF1aU&app=desktop
It's in a foreign language but beautifully presented by a fine mechanic,
The key here is that only one body panel is removed in the process - simple! No exhaust removal and no luggage compartment extraction is required,
I followed the above instructions in upgrading to YSS shocks on my 2013 PCX 150, adding some technical information and converting to a slide show which some may find more helpful than a video.
http://www.pindelski.com/Honda%20PCX%20 ... pgrade.pdf
45 minutes if you are not taking photographs. And boy, is it worth it!
Enjoy!
- GeorgeSK
- Forum Benefactor
- Posts: 986
- Joined: Thu Jun 27, 2013 9:36 pm
- Year: 13PCX,15Forza
- Color: Both Red
- Location: Danvers MA USA
Re: Shock upgrade
This is one of the finest how-tos I've seen here. Might one of the mods slide this beauty into its rightful place in the pantheon of knowledge (ie - the PCX How-To section)?
Thanks, Thomaspin.
Thanks, Thomaspin.
On my scoot, getting there is WAY more than half the fun!
Please paste this address into a new tab and add yourself to the map: https://www.google.com/maps/d/edit?mid=1NlP7xk7KMdJReQnm-iDhldFBdpQ&ll=4.995760578398276%2C0&z=2
but please, don't delete anybody, no matter how badly they deserve deleting![Smile :)](./images/smilies/icon_e_smile.gif)
Please paste this address into a new tab and add yourself to the map: https://www.google.com/maps/d/edit?mid=1NlP7xk7KMdJReQnm-iDhldFBdpQ&ll=4.995760578398276%2C0&z=2
but please, don't delete anybody, no matter how badly they deserve deleting
![Smile :)](./images/smilies/icon_e_smile.gif)
- Gil
- Frequent Poster
- Posts: 623
- Joined: Mon Nov 09, 2015 10:20 pm
- Year: 2013
- Color: black
- Location: Watsonville, CA
Re: Shock upgrade
Great guide, it should be helpful to those that haven't done any mechanical work. Great pictures also.
Gil
Gil
![Image](http://badges.fuelly.com/images/sig-us/553752.png)
![Image](http://badges.fuelly.com/images/smallsig-metric2/553752.png)
- 2013 Honda PCX 150, NCY Variator kit, Dr Pulley 13g Roller weights
- IRC and City Grip tires, LED driving lights, Coroplast top box, MFR exhaust, Daytona Windshield.
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Shock upgrade
Top quality.
- Oyabun
- Frequent Poster
- Posts: 640
- Joined: Sun Jun 28, 2015 4:24 pm
- Year: `12,`15,`19
- Color: black&black
- Location: Europe
Re: Shock upgrade
Great work Thomas,
One comment though. You got the spring preload explanation reversed. Shocks have the least preload when the ring is at the top, and as one compresses it it will have a higher preload setting. Also not to mix preload with ride stiffness. Adding preload sets the initial spring tension and sag (the initial squash of the suspension when you sit on the bike), but the spring characteristics stays the same. Firmer ride is provided by a firmer spring.
One comment though. You got the spring preload explanation reversed. Shocks have the least preload when the ring is at the top, and as one compresses it it will have a higher preload setting. Also not to mix preload with ride stiffness. Adding preload sets the initial spring tension and sag (the initial squash of the suspension when you sit on the bike), but the spring characteristics stays the same. Firmer ride is provided by a firmer spring.
- easyrider
- Frequent Poster
- Posts: 1597
- Joined: Sat Dec 19, 2015 6:23 pm
- Year: 2013
- Color: blk
- Location: Long Island , NY, Tampa, Ft laud
Re: Shock upgrade
X2Oyabun wrote:Great work Thomas,
One comment though. You got the spring preload explanation reversed. Shocks have the least preload when the ring is at the top, and as one compresses it it will have a higher preload setting. Also not to mix preload with ride stiffness. Adding preload sets the initial spring tension and sag (the initial squash of the suspension when you sit on the bike), but the spring characteristics stays the same. Firmer ride is provided by a firmer spring.
- PCX150Rider
- Frequent Poster
- Posts: 1832
- Joined: Tue Jan 17, 2017 1:56 pm
- Year: 2017
- Color: White
- Location: Old Saybrook, CT
Re: Shock upgrade
Thanks!
Seems like a real time saver. Slow and deliberate removal of the panels and disengagement of the tabbed areas results in no cracks or damage.
I've been thinking lately about what my next set of shocks will be when the OEM set wears out and the amount of work I'll have to do to replace them.![Cool 8)](./images/smilies/icon_cool.gif)
Seems like a real time saver. Slow and deliberate removal of the panels and disengagement of the tabbed areas results in no cracks or damage.
I've been thinking lately about what my next set of shocks will be when the OEM set wears out and the amount of work I'll have to do to replace them.
![Cool 8)](./images/smilies/icon_cool.gif)
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Shock upgrade
3.easyrider wrote:X2Oyabun wrote:Great work Thomas,
One comment though. You got the spring preload explanation reversed. Shocks have the least preload when the ring is at the top, and as one compresses it it will have a higher preload setting. Also not to mix preload with ride stiffness. Adding preload sets the initial spring tension and sag (the initial squash of the suspension when you sit on the bike), but the spring characteristics stays the same. Firmer ride is provided by a firmer spring.
And maybe just remove and refit one shock at a time?
-
- New Member
- Posts: 4
- Joined: Mon Sep 25, 2017 2:20 pm
- Year: 2013
- Color: Red
- Location: Scottsdale, AZ.
Re: Shock upgrade
I have corrected the error concerning the preload settings. Thank you for pointing that out.
- WhiteNoise
- Official Moderator
- Posts: 8784
- Joined: Mon Nov 07, 2011 11:15 pm
- Year: 2015 PCX 150esp
- Color: Pearl *White*
- Location: L.I. N.Y.
Re: Shock upgrade
@ George,
and the Mods listened
We thank you
and the Mods listened
![Wink ;)](./images/smilies/icon_e_wink.gif)
Location, Year & Color - Please enter Yours today!
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
- Mel46
- Forum Benefactor
- Posts: 6959
- Joined: Tue Nov 13, 2012 5:13 pm
- Year: 2013
- Color: red PCX
- Location: Dallas, Ga USA
Re: Shock upgrade
It reminds me of how I installed our replacement shocks. I think I did it just about the same way. However, I found a way to take the pressure off of the shocks by throwing adjustable tie downs over the I-beams in our basement and connecting them to the frame near where the shocks connect. That also made it more stable during the upgrade, and a lot easier to work on.
Currently own:
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
-
- Regular User
- Posts: 207
- Joined: Mon Aug 17, 2015 5:56 am
- Year: 2014
- Color: white
- Location: Brussels
Re: Shock upgrade
Whoa, Well done. I had made the tutorial for the French forum but yours is tops!
Question, so adding more Preload for lighter weights? Is this correct? I'm puzzled because i thought more preload for more weight? No wonder mine felt like wood, i had them almost at the top. I have to change my settings...
Question, so adding more Preload for lighter weights? Is this correct? I'm puzzled because i thought more preload for more weight? No wonder mine felt like wood, i had them almost at the top. I have to change my settings...
-
- Frequent Poster
- Posts: 1830
- Joined: Wed Jun 10, 2015 4:30 pm
- Year: 18 300 xmax
- Color: White
- Location: Fort lauderdale
- Contact:
Re: Shock upgrade
Add preload for heavier loads....
Glen
‘15 PCX build thread here:
https://www.hondapcx.org/viewtopic.php?f=2&t=4640
Current: ‘18 XMAX 300 & ‘22 NAVI
‘15 PCX build thread here:
https://www.hondapcx.org/viewtopic.php?f=2&t=4640
Current: ‘18 XMAX 300 & ‘22 NAVI
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Shock upgrade
X2. But to be honest there is more to it than that. At least you’ll be going in the right directionJge64 wrote:Add preload for heavier loads....
-
- Regular User
- Posts: 207
- Joined: Mon Aug 17, 2015 5:56 am
- Year: 2014
- Color: white
- Location: Brussels
Re: Shock upgrade
Well that's what i thought too. More preload x more weight. But when i reduce it (Im 90kgs all gear on) bike is really not confy and shocks seem to lock, (bottoming?) when i add more at least i feel suspension work but still not confy! Bloody YSS... Mine seem to be OK only when riding in duo and yet they are XL size, so meant for 90 Kg! Never had that with my former pcx with G series...
-
- Forum Benefactor
- Posts: 313
- Joined: Tue Jun 14, 2016 9:37 pm
- Year: 2013
- Color: Black
- Location: Kitchener, ON Canada
Re: Shock upgrade
Old thread revival time! The PDF is not available at the link listed anymore: http://www.pindelski.com/Hond.... Anyone have a copy?
![Image](http://badges.fuelly.com/images/sig-metric/439667.png)
![Image](http://badges.fuelly.com/images/smallsig-metric2/439667.png)
![Image](http://badges.fuelly.com/images/smallsig-us/439667.png)
2013 Black PCX 150
Mods/accessories:
Honda tall windshield, Honda top box, NCY variator and face with 13gram rollers, LED headlamps & taillight with, Backoff indicator
Kawell rectangular lights-fork, mounted
Cheeky Seats seat cover (de-humped), YSS PDC and front spring upgrade 15W fork fluid, YSS rear spring/damper upgrade-preload adjustable only, lots of reflective tape and other accessories
Previously owned:
1969 Honda K50 mini trail (first bike, still runs great and in the family)
1975 Honda CB125
1978 Yamaha DT400 (bored 2 stroke insanity)
1986 Kawasaki Ninja 250r
Re: Shock upgrade
Its pretty straight forward. Remove the storage bin and seat. Once you remove that its just 2 bolts per shock. I can take some pictures of the what bolts and retainer pins you need to remove in order to remove the storage bin if you'd like. Its rather easy, I do it all the time.
2017 PCX 150
Wirus Win Exhaust
Steady Garage Intake
Z-Bars
NCY Variator
Wirus Win Exhaust
Steady Garage Intake
Z-Bars
NCY Variator
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Shock upgrade
Conelite wrote:Its pretty straight forward. Remove the storage bin and seat. Once you remove that its just 2 bolts per shock. I can take some pictures of the what bolts and retainer pins you need to remove in order to remove the storage bin if you'd like. Its rather easy, I do it all the time.
Is it two bolts per shock? The uppers look like nuts with integrated washers.
Re: Shock upgrade
you you wrote:
Is it two bolts per shock? The uppers look like nuts with integrated washers.
Each shock has:
- 1 nut on top
- 1 bolt on the bottom
2017 PCX 150
Wirus Win Exhaust
Steady Garage Intake
Z-Bars
NCY Variator
Wirus Win Exhaust
Steady Garage Intake
Z-Bars
NCY Variator
-
- Forum Benefactor
- Posts: 313
- Joined: Tue Jun 14, 2016 9:37 pm
- Year: 2013
- Color: Black
- Location: Kitchener, ON Canada
Re: Shock upgrade
I forgot since replacing my rears. Someday when UK Post decides to ship my new, better rate springs. Thanks!
![Image](http://badges.fuelly.com/images/sig-metric/439667.png)
![Image](http://badges.fuelly.com/images/smallsig-metric2/439667.png)
![Image](http://badges.fuelly.com/images/smallsig-us/439667.png)
2013 Black PCX 150
Mods/accessories:
Honda tall windshield, Honda top box, NCY variator and face with 13gram rollers, LED headlamps & taillight with, Backoff indicator
Kawell rectangular lights-fork, mounted
Cheeky Seats seat cover (de-humped), YSS PDC and front spring upgrade 15W fork fluid, YSS rear spring/damper upgrade-preload adjustable only, lots of reflective tape and other accessories
Previously owned:
1969 Honda K50 mini trail (first bike, still runs great and in the family)
1975 Honda CB125
1978 Yamaha DT400 (bored 2 stroke insanity)
1986 Kawasaki Ninja 250r