The Honda PCX / Forza / ADV150 / SH Forums

Hi guys just looking for some info, I am running the yuminashi 164 kit on my 2011 pcx 125 with 31mm the and their camshaft with matching injector. I am gonna order the 150 head conversion kit and was wondering if I am gonna need a fuel controller ??? And if I do is the yuminashi one the best one to ...

It was a Dyno jet my head is also decked because it was warped. So it may have a little more compression than normal.

Went to the Smokey mountain crawl this past weekend and put my bike on the dyno. It made 14.71 horse power and almost 9 ftlbs of torque. The is on a 2011 pcx motor with the 164cc essentials kit with 31mm tb and matching cam. Def. Pulls good being bolted onto a ruckus chassis. Had the 4 the highest h...

So is the 1.6 psi radiator cap the biggest they make I am still pushing coolant into my overflow when running high rpm

Hmmmm decisions decisions has anyone ever used the GPI radiators ??? Also do I have to buy a new cam or will the 125 cam work in the 150 head???

If you're using the 125 with big bore cylinders,its advisable to port out the water holes on the head to match the gasket ports for the cylinder. A quick dremel work is required for it to be done. That'll allow a maximum water flow and cooling effect the way its supposed to be. Using a 150 head has...

Sounds like you are too lean on WOT. Are you the guy who milled his head down a bit? That can cause increased compression. Yuminashi kits already come with very very very high compression ratios already. However, I have a guy running the same kit without problems and he squeezed 20000km or 12500 mi...

So I have put about 500 miles on my 164 kit in my 2011 pcx 125 and it's starting to have some issues. If I run for wide open for longer than a minute or so it will start pushing coolant into the overflow. If I ride slow it won't have an issue just when I am being heavy on the throttle. I have the 1....

try the cap first, maybe run longer radiator hose/s or air scoop?(see link) check page 11 of takegawa pcx 170 http://s1228.photobucket.com/user/vladmel1/media/P1010176_zps42fdb47e.jpg.html So not to be a total creeper but in this Photobucket link their is a picture of a pcx radiator split in one of...

I'd be checking all of the hoses and clamps... I have pretty much checked everything other than replacing the thermostat. I can actually see the splits in the radiators and where it's leaking.they always seem to split in the core right on the front or back of the tube Maybe change the thermostat, i...

Pcxdemon wrote:I'd be checking all of the hoses and clamps...

I have pretty much checked everything other than replacing the thermostat. I can actually see the splits in the radiators and where it's leaking.they always seem to split in the core right on the front or back of the tube

Update well I discovered my problem when I tore it back down the head was warped. Had it milled down about 6 thousandths and every thing was good after start up I put about 100 miles on it of short trips here and their with no issues what so ever. Last night decided to take a longer trip and rode ab...

Well I received all of my parts and put the engine together this past weekend and took it out for a ride and it started burning coolant. I am gonna triple check again that my head wasn't warped but is their any secrets to these copper head gaskets?? should I have put something on it??

Well update after my post yesterday I magically got an email from them. They looked into and did realize my parts were missing as of last night he had them boxed up and ready to ship and even threw in a set of roller rockers for my troubles. So we will see if it gets here in time. Their is a big rid...

I ordered it I think around August 19th and received it September 14th. Which I also received a message from him on Sept. 2nd that said he was sorry it was taking so long but he had to let one of his guys go and that it looked like everything was in stock and he would get it shipped out as fast as p...

Hey guys I am new here, but have been trolling around for the past year since I bought my pcx!!! Recently I ordered a yuminashi essentials kit which comes with the 164cc bore up kit and cam throttle body and all kinds of other goodies. Well I received it about a week ago and the cam and throttle bod...