The Honda PCX / Forza / ADV150 / SH Forums

for future reference , I made an extended tap wrench from 20mm dia tube with a 5mm thick 6mm square holed washer welded to the end (pictures supplied if needed ) and the hole tapped out 7/16 unf , all the way through , the swing arm hole was already 11.2mm so didn't need drilling out , all in all a ...

i have got a 7/16" unf taper and plug tap and a hex head bolt , had to make an extended tap wrench so will bash on at the weekend , should be a good fix ,
thanks again for all the suggestions

thanks for replies guys , ill see if I can get a 7/16 " tap and bolt ----- should be easier to obtain now we are leaving Europe

hi to everyone ,im new to this site and need some help , I removed the rear wheel on my pcx 125 to have a puncture repaired , the upper swing arm bolt towards the front of the bike was already loose and upon removal I found the thread in the aluminium casing to be stripped , will this either A. tap ...