The Honda PCX / Forza / ADV150 / SH Forums

1. 2PC X HS5 80W LED Play http://s.aliexpress.com/Iv6jUBvm?fromSns=Copy to Clipboard 2. Motorcycle Headlight HS5 35/30W Halogen Lamp 5000K Xenon Gas Filled Headlamp P23t Light Source Hard Glass 2PCS http://s.aliexpress.com/e6NFvUZv?fromSns=Copy to Clipboard 3. SUKIOTO 55W hi low hs5 motorcycle bulb ...

Leds do not last forever, but generally should last a long time. They are diodes after all, albeit emitting light, so they need a certain voltage to operate with a much reduced cut-off compared to bulbs which just get dim when fed low volts. They may have reservoir capacitors to hold a small charge...

It is my understanding that LED's either work or they don't. Where yours come on for a bit, then fade and go out, I think you have a power problem. I wish I could help further. Good luck. Those dead/dying LEDs (they are very weak) are getting around 11.xxV is it possible? I mean LEDs made to work o...

High Contrast back.jpg Here is part of the wiring diagram. It has the starter/alternator. Maybe someone on this thread can find the diodes. I can't. If you can't, then there is no way I would find them. I don't have 10% of your experience with these things.. Thankfully, I'll check the grounds with ...

[img width=5312 height=2988]https://drive.google.com/open?id=1HjKosr6mjQjnwFp4WK42eHb6gdeIE_L3[/img] [img width=5312 height=2988]https://drive.google.com/open?id=1X10MuPrPauJbxKJ4a1VTozzu7KyM_I9I[/img] [img width=5312 height=2988]https://drive.google.com/open?id=1NDNLcIwwHYBpEP-0ccjf_HXt7G9fdQFy[/im...

Three concerns.. Check Grounds for tightness and ECM plugs.. Try another known good battery if available.Swap it out with a friends just to see. Charging system (rectifier)(CDI) could be the culprit as you propose. The stator produces A/C current which is alternating off and on (pulses).The rectifi...

if all you battery connections and ecm connections are clean and tight then check your voltage output . Start the bike and run voltage meter on the bat terminals.. See what voltage you have.. How old is the battery ? It changes the values between 13.xxV-14.xxV.. However it was around 12.56V before ...

Last month only less than 2 months old 4500K bulb has been burned, before that happened I noticed this flickering while at idle, and now this morning, I got my battery died (I thought because I washed the bike yesterday and might had a some kind of short), then after charging the battery I realized ...

I currently have one of these which works out very well and only requires me to charge it about every 3 weeks or so. https://www.amazon.com/XCSOURCE-PS110-GPS-tracker-TKSTAR/dp/B01KX9HFWI I need a location on the bike where it is easy to hide, but also still easy enough to access when it comes time...

Here is a link to the partzilla.com part diagram for the front brake area. https://www.partzilla.com/catalog/honda/scooter/2013/pcx150-ac-pcx150/front-brake-caliper I believe the part number for the brake pads is 06455-KZL-931. I hope this helps. Sorry for the late reply, I bought from a local stor...

DushFernando92, I was not implying anything by that, I am simply pointing out that the vin number is universally put somewhere on the bikes, but also are required to be very visible on the models going to the United States, so we have a plate attached to the right front panel close to knee level wh...

I am guessing that his next question is where is the bin number located on his bike. Remember that he is in Sri Lanka. Does that supposed to mean that we are stupid or something? I actually was wondering about my VIN number since everyone had some characters before their VIN numbers, but mine has o...

There were some minor changes between the 2011 and the 2013 model, and the 2012 model was not sold in the United States. I am going to guess that the 2012 model was an odd duck in that it may have had some of the later changes, but it was basically a 2011. One example of the changes made to the 201...

Thank you very much for the information, actually I was wondering if mine was older than the 2013 model.. It has that V you are talking, anyway I almost forgot about this post and ordered 2013 parts from Bikerzbits last night.. Mine is either 2012/3, I can't tell it apart.. It seems both these model...

First of all, I'm confused.. I bought my Honda PCX JF28E-13XXXXX this year and the seller(previous owner) has told me this is 2013 version, but to be honest, I have been struggling for months now to find out which year bike model this belonged to.. The drive belt part number is 23100-KWN-7110-M1 Hon...

Can someone please tell me where to find this "VIN" number? Is that the same with Chassis Number? :S If that's it then when I check it from the website mentioned above then it gives me this info.. "Manufacturer Name: Fuji Heavy Industries Ltd Address: 10-1 Higashi Honcho Ota City Zip ...

PCX is a luxury scooter here as well, so the most parts are expensive and very small amount of dealers here who sells spare parts, so I am going to online order some parts from Bikerzbits.co.th since the price is reasonable than paying twice or thrice for some parts here, only thing I didn't find th...

I really have trouble choosing brake pads for my PCX 2013, can I use this 06455-K20-911? It says it's only for PCX 2014-2017 and 06455-KZL-861 says it's for 2010-2012 :/ Which one should I buy? Or does anyone has 2013 Part Catalogue? Thanks!

Mel46 wrote:Now BOTH of those sets look like they would be great! I might have to order a set for my wife's bike!

Lucky you, since those are about 6000K I don't know if they are legal here..

Haha so I assume none of you have ever tried to do that yourself? I bought this motorcycle secondhand in April, the light on meter was always red at night so I thought Honda was stupid that they never put a light around the digits until I watch a Honda PCX 2013 Dashboard video on YouTube. The blue l...