The Honda PCX / Forza / ADV150 / SH Forums

Jge64 wrote: ↑Mon Mar 01, 2021 11:53 am Are you sure you’re not screwing it all the way in and using all the threads and making it tight, or are you just sitting the stick on top of the threads and not screwing it in?

the latter

Very strange. So I went to the workshop to get the old oil drained out and put in new fresh engine oil. I told the mechanic to put in 800 mls, which he did. After which, I went for a ride for about 20 kms then stopped for a break. After waiting for about 10 minutes, I took out the dipstick to check....

Definitely way too much. Buy a 1000ml Measuring cup. Drain all your oil, Measure it and reinsert exactly 1000mls. Shouldn't take much more than 10 minutes. Screen Shot 2021-02-26 at 10.37.00 AM.png shouldn't it be 800 ml? or can i use a straw and remove the excess oil until it reaches a more satisf...

Is this too much engine oil? Checked 15 mins after switching the engine off after coming back home. What should I do to remove some of it? The last engine oil change was done by a junior mechanic at the workshop. Could there have been damage done to the engine? https://i.imgur.com/COR1tgI.jpg https:...

than from 60kmh and upwards

what's happening?

I saw it engraved on the spoke of the rear wheel.

What does it mean?

Ok, I realize I am replying to myself but it might be useful for other people so here goes. I decided to buy the above mentioned dr. pulley variator. It came by default with 15gr. sliders which state it should be good for good acceleration and a slightly higher top end (at least it says so on the w...

I noticed you have a 2014. I used to have a 2017 but never heard any noises on it like that . . .. Is the belt worn at all? If you've replaced the pully sliders you must have either done it for performance or the originals were old and needed to be replaced anyways. Hence, the belt must have some w...

Hi all,

I just installed the Dr Pulley sliders, 14.5 grams, as recommended by the workshop.

However, I noticed there is this sound. Is it normal? Or is something wrong?

What's the cause of it?

Thanks.

Hi all,

I just installed the Dr Pulley sliders, 14.5 grams, as recommended by the workshop.

However, I noticed there is this sound. Is it normal? Or is something wrong?

What's the cause of it?

Thanks.

Hi all,

From which online site can i purchase Dr. Pulley sliders? My bike is either a 2013 or 2014, non-led headlight bike.

How would I find out which is the correct size?

For example, what does 20x15 exactly refer to?

I realized that when at 31 mph and above, the engine sounds rougher and/or louder than usual.

I had the engine oil changed at roughly 1000 km prior to this phenomenon happening.

What are some of the possible causes?

Hi all,

So I just bought and got this Bitubo rear shocks installed at the dealer's workshop.

SC209YGB01

In which direction do I turn it to make it softer? Clockwise or anti-clockwise?

And for how many rounds?

https://i.imgur.com/36xPed1.jpg

Thanks.

Recently, when I pressed the left brake lever together with the engine start button at the same time, it seemed to hesitate for a bit before starting up.

What are the possible causes?

How does the PCX start its engine up?

Hi Have a look at this thread, it starts discussing the front suspension and recently we have talked about the rear... https://www.hondapcx.org/viewtopic.php?f=9&t=4877 Hi, I'm totally new to this. What do the numbers 46-10-15-200 mean? If I remember correctly, someone said it is the spring rat...

Hi all,

I'm from Singapore. I've a 2014 pcx 150 which has 51,000 km on it.