Re: Throttle body neck
Posted: Wed Jul 02, 2014 1:44 am
Wow! Thanks for the info! Do you have any pictures?
The Honda PCX / Forza / ADV150 / SH Forums
Your predominant source of information for the Honda PCX, Forza and SH! Now featuring an ADV150 subforum!
https://hondapcx.org/
Throttle body neck
Page 2 of 2
Re: Throttle body neck
Posted: Wed Jul 02, 2014 9:41 am
I'll try and get some posted today. I'm riding instead of driving so I'll take some pictures after class.
Re: Throttle body neck
Posted: Wed Jul 02, 2014 10:10 am
Awesome! thanks! In the mean time i'm looking at getting a stubby backbox, cutting the original one off and clamping the new one on! 
Re: Throttle body neck
Posted: Thu Jul 03, 2014 6:49 am
Here is the back side of the airbox and the washers I used on the airbox as spacers to clear the rear tire.
Re: Throttle body neck
Posted: Thu Jul 03, 2014 7:00 am
Awesome! thanks for that! how does it sound?
Re: Throttle body neck
Posted: Fri Jul 04, 2014 5:10 am
its a louder growl as opposed to stock and you get a harmonic vibration from 5700-6300 rpm!
Re: Throttle body neck
Posted: Fri Jul 04, 2014 7:40 am
What's a Harmonic Vibration? lol
Re: Throttle body neck
Posted: Fri Jul 04, 2014 12:15 pm
At a certain frequency there is a vibration.
Re: Throttle body neck
Posted: Fri Jul 04, 2014 12:45 pm
Fit a harmonic vibration damper then.
Here is one attached to an exhaust.
Here is one attached to an exhaust.
Re: Throttle body neck
Posted: Fri Jul 04, 2014 4:39 pm
Alibally wrote:Fit a harmonic vibration damper then.
Here is one attached to an exhaust.
Harmonic vibration damper = weight
I want a space harmonic vibration damper!!
Or a low calory one
Or maybe just a weight....
Re: Throttle body neck
Posted: Sat Jul 05, 2014 12:24 am
Good idea. I'll have to think on that one a bit.
Re: Throttle body neck
Posted: Tue Aug 19, 2014 3:15 am
SO i tried to fit it but i didn't go as planned, (the pipe is at the wrong angle 
can anyone help with this?
can anyone help with this?Re: Throttle body neck
Posted: Wed Aug 27, 2014 2:18 pm
This is hands down funniest read, ripe with sexual overtones, lost it at the peanut part ROFL, still laughing too funny... FAIL! un-install forum
Re: Throttle body neck
Posted: Wed Aug 27, 2014 4:04 pm
Cut a few slices the width of your saw blade in the pipe an bend it over then take it to an exhaust shop to weld it up.
Re: Throttle body neck
Posted: Wed Aug 27, 2014 6:29 pm
there was box vibration but the pipe didn't fit so I had to put a bend on it, you boys need to get a wifeMgalutia88 wrote:Cut a few slices the width of your saw blade in the pipe an bend it over then take it to an exhaust shop to weld it up.