The Honda PCX / Forza / ADV150 / SH Forums

The Honda terminal connectors arrived so it is time to hook up the LEDs on the Givi V47. Thank goodness for walk-out basements in the winter.

Look forward to your post wiring report.
The Honda decal on the right side of your scoot caught my eye. I thought the wings were forward facing but maybe not on the version where wings beside letters as opposed to larger wings above name. This eBay example is what I thought directing of wings was as in a right and left decal -
http://www.ebay.ca/itm/Tank-black-HONDA ... 02&vxp=mtr
I bought the raised decals which look very good -
http://www.ebay.ca/itm/62mm-Honda-logo- ... 9b&vxp=mtr

Man you caught me - first one too. I already used the larger black wing decals on my PCX and the only large ones left on the sheet I have are white so I went with the small black ones on my wife's prompting. They are half right. I may replace them.




You can see the plug I need to adapt into is right behind the tool box. The hard part is wiring the plugs correctly but even that is easy with the manual and wiring diagram. I bet they sell one somewhere already made up.

Well I don't have all of the right size/color wires to match so the next guy doesn't have to guess what is going on and so it matches the service manual wiring diagram. It's off to the store for a bit. I took some more pictures in the mean time. This is really easier than I thought it might be. Don't let someone charge you and arm and a leg for doing this.

Thanks for pics SECoda - probably a spring job for me now as I live in a condo with not so well lit parking.
I am going to see if there are any decals at a big motorcycle show in town over the coming weekend. It describes itself as 425,000 Sq ft of babes, bikes and cool stuff! Gotta have something to do when it's -20 outside.
http://www.motorcyclesupershow.ca/admissions.html

Forza tail lights 6 pin plug and functions per wiring diagram. Five wires used.


AdMore Light kit harness. There are six wires but the blue an red wires connect to the black tail light wire on the Forza. Connecting the wires to the adapter blocks is the easy Part. I put the wires in black shrink tubing. Electrical tape wrap will do.

95% of the work can be done inside. Removing the four plastic clips on the tool box and plugging the new adapter in and then reinstallimg the tool box with four plastic clips is the only outside work. Even the case can be brought in to add the LEDs as I did.

Cool motorcycle show!

Monty1952 wrote:Thanks for pics SECoda - probably a spring job for me now as I live in a condo with not so well lit parking.
I am going to see if there are any decals at a big motorcycle show in town over the coming weekend. It describes itself as 425,000 Sq ft of babes, bikes and cool stuff! Gotta have something to do when it's -20 outside.
http://www.motorcyclesupershow.ca/admissions.html

This finishes the Givi V47/Admore Lighting project.

Final shots of new wire harness and a video of the lights
I solder everything after building a homebuilt airplane.





Don't miss the video...
https://www.youtube.com/watch?v=1v88Cfw ... e=youtu.be

nice piece of work friend

Thanks! The pictures were half the fun. It maybe time for the next project which is the NCY stuff on the PCX.

I wish we could Edit for longer and reduce the number of posts. I understand the restriction in the classifieds but not the general areas. I forgot to mention the AdMore brake lights flash three times before they go to the brighter red.

Switched the decals to these. My Honda dealer was happy to see me. Made a little longer video with my brothers prompting. I have never tried streaming from YouTube. I may edit this real quickly.

Do you have a part number for the Honda terminal connectors? This is exactly the way I want to do mine.

wilbur wrote:Do you have a part number for the Honda terminal connectors? This is exactly the way I want to do mine.

Anyone else have a clue? Been searching for days.

Very sorry Wilbur. I Don't get all notifcations. The bag of connectors i bought on EBay are general for all Japanese bikes and atvs. I think it was $20 and i have enough for life. A guy in NY sells them. There is a smaller bag too for $8 i think but i wanted enough of each size to last. Honda oem sells them but they are outrageous for two.

wilbur wrote:

wilbur wrote:Do you have a part number for the Honda terminal connectors? This is exactly the way I want to do mine.

Anyone else have a clue? Been searching for days.

I don't see the large connector kits for sale on EBay right now. ATV online stores sell them. Any Honda oem parts stores have the connectors too.

Have you found the box and and backrest to be plenty sturdy for passenger to use for a backrest?