Re: pcx power-full
Posted: Mon Dec 03, 2018 3:45 am
More fotos
Enviado do meu GT-I9060I através do Tapatalk
Enviado do meu GT-I9060I através do Tapatalk
Enviado do meu GT-I9060I através do Tapatalk
The Honda PCX / Forza / ADV150 / SH Forums
Your predominant source of information for the Honda PCX, Forza and SH! Now featuring an ADV150 subforum!
https://hondapcx.org/
pcx power-full
Page 4 of 9
Re: pcx power-full
Posted: Mon Dec 03, 2018 3:46 am
Castrol racing 5w40 com ptfe e faher hd anti-fricção
Enviado do meu GT-I9060I através do Tapatalk
Enviado do meu GT-I9060I através do Tapatalk
Re: pcx power-full
Posted: Tue Dec 04, 2018 8:28 am
Boy, that old piston looked really bad! It would have been a miracle if the bike ran at all. Good to see that you have rebuilt it into such a beautiful bike.
Re: pcx power-full
Posted: Tue Dec 04, 2018 8:51 am
Agreed. A sign of how engine designs have improved is to look at newer piston designs - and then compare them to pistons from "back when". I'm holding one from a 1969 441cc BSA single that weighs many times more than a comparable new piston. I can't understand how the new ones (that are so "short" with so minimal vertical surface area) don't "wobble" in the cylinder bores. But they obviously don't.Mel46 wrote:Boy, that old piston looked really bad! It would have been a miracle if the bike ran at all. Good to see that you have rebuilt it into such a beautiful bike.
I do wish newer engines retained more flywheel weight - but I understand how magazine performance tests and compares impact sales - and how they don't prioritize the pleasant effects that more flywheel mass has.
Re: pcx power-full
Posted: Tue Dec 04, 2018 9:37 am
Looking forward to this.
Plenty of pictures?
Plenty of pictures?
Re: pcx power-full
Posted: Tue Dec 04, 2018 9:47 am
lately with the original piston (I do not know the history of the engine from 2016 to the present, but not any note of revisions made in those 6 years and in those 16 thousand km ... hence the piston be like this year in August (2018) before buying this kit of yuminashi the motorcycle started to spend oil (hence the piston being so I think), already presented about 45 thousand km ...
at this moment I am with 51000 km and very happy, was bet right. .. want to see more pictures of what? Only this year I have 590 photos of motorcycle and motor
at this moment I am with 51000 km and very happy, was bet right. .. want to see more pictures of what? Only this year I have 590 photos of motorcycle and motor
Re: pcx power-full
Posted: Tue Dec 04, 2018 10:04 am
More pictures of the engine build. Or is this already done?
Re: pcx power-full
Posted: Tue Dec 04, 2018 10:13 am
That's a honkin big piston. What do you think the displacement (cc's) will be when it's done? 
Or was that a piston from a 441 Victor that you were referring to. . ..???
I may have misunderstood.
Or was that a piston from a 441 Victor that you were referring to. . ..???
I may have misunderstood.
Re: pcx power-full
Posted: Tue Dec 04, 2018 3:13 pm
well this was all set up in August 2018.
I have some photos of montage and painting of rims. I already put a few here.
You want to know what I've got?
I have some photos of montage and painting of rims. I already put a few here.
You want to know what I've got?
Re: pcx power-full
Posted: Tue Dec 04, 2018 3:46 pm
Photos
Enviado do meu GT-I9060I através do Tapatalk
Enviado do meu GT-I9060I através do Tapatalk
Re: pcx power-full
Posted: Tue Dec 04, 2018 4:06 pm
Fotos 2
Enviado do meu GT-I9060I através do Tapatalk
Enviado do meu GT-I9060I através do Tapatalk
Re: pcx power-full
Posted: Tue Dec 04, 2018 4:07 pm
Fotos 3
Enviado do meu GT-I9060I através do Tapatalk
Enviado do meu GT-I9060I através do Tapatalk
Re: pcx power-full
Posted: Tue Dec 04, 2018 4:10 pm
Fotos 4
Enviado do meu GT-I9060I através do Tapatalk
Enviado do meu GT-I9060I através do Tapatalk
Re: pcx power-full
Posted: Tue Dec 04, 2018 4:13 pm
Fotos 5
Enviado do meu GT-I9060I através do Tapatalk
Enviado do meu GT-I9060I através do Tapatalk
Re: pcx power-full
Posted: Tue Dec 04, 2018 4:14 pm
Fotos 6 
Enviado do meu GT-I9060I através do Tapatalk
Enviado do meu GT-I9060I através do Tapatalk
Re: pcx power-full
Posted: Tue Dec 04, 2018 4:16 pm
Fotos 7
Enviado do meu GT-I9060I através do Tapatalk
Enviado do meu GT-I9060I através do Tapatalk
Re: pcx power-full
Posted: Tue Dec 04, 2018 4:18 pm
Fotos 8
Enviado do meu GT-I9060I através do Tapatalk
Enviado do meu GT-I9060I através do Tapatalk
Re: pcx power-full
Posted: Tue Dec 04, 2018 4:26 pm
I might be wrong, but I think the photo illustrates how "short" the piston is - and it therefore makes the piston look like it's for a larger bore when in fact it isn't. It's just sooo "short". Hopefully this makes sense.That's a honkin big piston. What do you think the displacement (cc's) will be when it's done?
Re: pcx power-full
Posted: Tue Dec 04, 2018 4:30 pm
At the moment I have the kit yuminashi 164cc, 60mm, maximum speed in gps 132kh, in the kilometros account reaches almost 145kh ..
I also have the malossi inverter with 13.5gr.
however I have to mount a yuminashi variator kit, and the box still longer 13x51x38 .. I'm running out of time .. as soon as possible put some videos
Enviado do meu GT-I9060I através do Tapatalk
I also have the malossi inverter with 13.5gr.
however I have to mount a yuminashi variator kit, and the box still longer 13x51x38 .. I'm running out of time .. as soon as possible put some videos
Enviado do meu GT-I9060I através do Tapatalk
Re: pcx power-full
Posted: Tue Dec 04, 2018 4:33 pm
the kit is clearly for this motorcycle already runs more than 3000 km ...
Enviado do meu GT-I9060I através do Tapatalk
Enviado do meu GT-I9060I através do Tapatalk