Page 1 of 1

Disc Lock Help

Posted: Mon Apr 08, 2013 2:22 pm
by kyle6357
What disc lock will fit the Honda PCX 150? Standard 6mm? 10mm? Looking at one with alarm built in it. Suggestions?

Thanks!

Re: Disc Lock Help

Posted: Mon Apr 08, 2013 2:59 pm
by khaosaming
http://www.hondapcx.org/viewtopic.php?f=7&t=489
Just a quick note before you buy a disc lock make sure its a 6mm one or it wont fit,
Ps anyone want a cheap 8mm disc lock :oops:

Re: Disc Lock Help

Posted: Mon Apr 08, 2013 3:15 pm
by calinaz
Xena makes the best I've used. The alarm is real sensitive, so much that it won't let you forget you've locked it. If you even move the bike, it warns you with a beep, then goes off.

http://www.xenasecurity.com/product/mot ... low/page1/

Re: Disc Lock Help

Posted: Mon Apr 08, 2013 3:43 pm
by khaosaming
At least in Thailand, Honda's Anti Theft Alarm system comes fitted with every PCX.





You see the small led just below the red speedo needle? It blinks when the alarm is activated.
Image

Re: Disc Lock Help

Posted: Mon Apr 08, 2013 8:35 pm
by maddiedog
Sadly, we don't get the alarm elsewhere. I wish we did here in the US...

Re: Disc Lock Help

Posted: Sun Apr 21, 2013 9:06 am
by BikerBob
Does anyone know if the Xena model XZZ-6Y fits the pcx150? Even my dealer cannot answer, 6mm seems like it will but? don't need one that doesn't work for me! Really great site!

Re: Disc Lock Help

Posted: Wed Apr 24, 2013 7:16 am
by calinaz
I've got the 6L and it fits. I think the body size of the lock is a bit larger than the 6Y, but they both have the 6mm pin.

Re: Disc Lock Help

Posted: Fri Apr 26, 2013 12:45 pm
by figurehead71
I use a Xena XX6 on my PCX, you definitely need a 6mm pin one for the disk brake.

Piercingly loud...main downside I find is fitting the battery and stealthfully trying to remove the damn thing..key poised at the ready making sure it goes into the lock barrel and turned in one swift movement else it will go off!

Re: Disc Lock Help

Posted: Sat Apr 27, 2013 7:59 am
by calinaz
figurehead71 wrote:I use a Xena XX6 on my PCX, you definitely need a 6mm pin one for the disk brake.

Piercingly loud...main downside I find is fitting the battery and stealthfully trying to remove the damn thing..key poised at the ready making sure it goes into the lock barrel and turned in one swift movement else it will go off!
Agreed...I always feel like this when I'm taking off the lock: