Page 1 of 1
Fault Code Reader
Posted: Wed Nov 11, 2020 11:59 am
by ronslaverda
Hi
Can anyone tell me of a code reader that will work on a 2018 Forza 300?
Re: Fault Code Reader
Posted: Wed Nov 11, 2020 1:59 pm
by Old Scoot
Re: Fault Code Reader
Posted: Fri Nov 13, 2020 5:10 pm
by Oyabun
Unfortunately Tunerpro doesn't work with Honda motorcycles.
I use a similar cable than the lonelec conversion cable (4lole DLC to OBD) and a cheap OBD2 Bluetooth dongle connected to Torque Pro app on my Android servivmce tablet or phone. Works like a charm.
Ceveat: I haven't tested it on a for a 300, but it works on every Honda motorcycle I've tried it on (PCX 2013, 15, 2019), Cb500F, Cb500x, Cbr500r, cb650, Africa Twin Adventure sport 2018 etc.
Re: Fault Code Reader
Posted: Sun Nov 29, 2020 9:33 pm
by Gil
Oyabun what specific OBD2 dongle do you use? I use a similar one too what lonelec.co.uk has on it's site, but no go. The wired USB kit did work with my computer though.
Re: Fault Code Reader
Posted: Tue Dec 01, 2020 4:43 am
by Oyabun
I use a cheap Ebay special small blue color Bluetooth dongle.
Re: Fault Code Reader
Posted: Tue Dec 01, 2020 10:58 am
by iceman
Oyabun wrote:I use a cheap Ebay special small blue color Bluetooth dongle.
Not many have success - in past entries about this, someone says it works and others then have no luck at all getting their bits working on the PCX. Sometimes I believe it's a wiring issues as many of the connection diagrams off google search dissagree with one of the connection wires / functions - it seems it's not %100 standard at times.
Re: Fault Code Reader
Posted: Tue Dec 01, 2020 11:33 am
by Conelite
Im able to get power to my dongle but it gets no data. I think it is a wiring issue.
Re: Fault Code Reader
Posted: Tue Dec 01, 2020 4:55 pm
by iceman
Saved this diagram some months back - not sure it's the correct wiring or not.
Re: Fault Code Reader
Posted: Tue Dec 01, 2020 9:35 pm
by Gil
Oyabun wrote:I use a cheap Ebay special small blue color Bluetooth dongle.
I'm thinking that the dongle I have might just be outdated. I bought it years ago. I found a firmware update for it, I'll try and update the firmware, just for fun, and report back.
On a separate subject, has anyone bine able to read the rom from the ECM of the Honda PCX or Forza?
Re: Fault Code Reader
Posted: Wed Dec 02, 2020 3:42 am
by you you
Gil wrote:Oyabun wrote:I use a cheap Ebay special small blue color Bluetooth dongle.
I'm thinking that the dongle I have might just be outdated. I bought it years ago. I found a firmware update for it, I'll try and update the firmware, just for fun, and report back.
On a separate subject, has anyone bine able to read the rom from the ECM of the Honda PCX or Forza?
They are cheap so wouldn't it be worth buying a new one?
Re: Fault Code Reader
Posted: Wed Dec 02, 2020 3:54 am
by Gil
I like to tinker with arduinos and such. The PIC 3 programmer is a tool that i'll use in the future and it's fun. But, yes it would be 1/4 the price of a new OBD reader.