The Honda PCX / Forza / ADV150 / SH Forums

In this video, I show you how to remove the covers to access the CVT parts (drive belt, variator, rollers, and clutch) for removal, inspection, and installation on an old Honda ADV 150cc scooter. https://www.youtube.com/watch?v=Zr5Rinr7Rzs
Watch more tutorial videos on this model - https://bit.ly/HondaADVscooter

Get sliders here - https://bit.ly/ADVsliders

TOOL LINKS:
Rags - https://amzn.to/2Yh8jvg
Pick tool set -https://amzn.to/3rXSjBA
Ratchet 3/8 drive - http://amzn.to/2hhmnUs
Wire nylon brush - https://amzn.to/42CBslK
Digital caliper 12" - https://amzn.to/3fULYeu
Breaker bar 3/8 drive - https://amzn.to/3lrjIWj
Dry lubricant spray - https://amzn.to/30bx91v
180 grit sandpaper - https://amzn.to/3z1SPSJ
Anti seize lubricant - https://amzn.to/2Q4H57t
Waterproof grease - https://amzn.to/3KwEG1H
19mm socket 3/8 drive - http://amzn.to/2CiXNqo
22mm socket 1/2 drive - https://amzn.to/3aHoJ64
8mm deep socket 1/4 drive - https://amzn.to/3cNGsbs
Variator / Clutch holder tool - https://amzn.to/2ZuYJEA
3” / 6” extension set 1/4 drive - http://amzn.to/2wDuzzW
3/8 to 1/2 drive socket adapter - http://amzn.to/2HbrYnb
3/8 to 1/4 drive socket adapter - https://amzn.to/2WjHkjm
Torque wrench 0-150 ft/lb 3/8 drive - http://amzn.to/2Crqq4R

I just replied to Mitch's video after swapping out my belt. I really hope that belt didn't have a installation directional arrow on it. Didn't even think to look. It rides fine, though. Got it up to 68 MPH after.

That's odd, RandalllFlaggg. Belts usually have directional arrows for installation. It might just be okay now but problems might come later. Although if you've clocked 68 MPH on it already, probably not a major issue, just a head's up. Next time be sure to check all parts for any markings before installing.

Hey, yeah, the belt doesn't have direction arrows. In the video I mentioned, it says to have the labels printed on the belt face so they are readable. That's how the previous belt was installed. I hope yours is okay

RandalllFlaggg wrote: ↑Mon Sep 23, 2024 5:51 pm I just replied to Mitch's video after swapping out my belt. I really hope that belt didn't have a installation directional arrow on it. Didn't even think to look. It rides fine, though. Got it up to 68 MPH after.

It seems to be doing great. Higher top-end speed, too. Used to top out at 63 MPH. Coming home from work this morning had me hitting 68 MPH. Already ordered another spare belt from the Honda parts shop. The original belt lasted 8,666 miles.