The Honda PCX / Forza / ADV150 / SH Forums

Spent today getting to trips working around the pcx (owned for a year but been lazy on maintence so far)

Added the new k&n air filter without a hitch,

Then got to work adjusting back break, fixing the dam L plate, cleaning all those hard to reach places;),


Then my Givi screen arrived :O the most pretty now ahaha,

Ordered new tyres (city grips as recommended by gn2),

Next is for oil change, other adjustments, new top box maybe tank bag, wheel decals and then whatever else I fancy aha XD

Tom

http://i265.photobucket.com/albums/ii21 ... 7a2474.jpg

Was the Givi screen easy to install? I'm debating adding one... I know it might help with mileage, and some wind protection, but I'm not 100% convinced it's worth it yet. Let us know what you think!

dustin91 wrote:Was the Givi screen easy to install? I'm debating adding one... I know it might help with mileage, and some wind protection, but I'm not 100% convinced it's worth it yet. Let us know what you think!

Follow Maddiedogs instructions elsewhere in this forum. I did mine and it took all of 5 minutes. Took me longer to unpack the new Givi from the box. If I can do it, anybody can.

There is a YouTube video of a guy from Ireland installing one, if you search there.

Yh I used maddiedogs instructions and only really took less than 10 minutes, hardest thing was trying to find a dam 10mm ratchet piece XD

Thanks guys! I'll definitely check it out. Did two rides today in low 60º F (obviously) weather, and realised I don't yet have the appropriate gear for any weather colder than that. A shield may help for a little while before I have to keep my baby holed up for winter.

Gave everything a good check today, brake fluids, coolants etc,

Finally managed to get the 10w30 engine oil but turns out my ratchet set has been plundered and most are missing ,

Gonna have to make a run to B&Q tomorrow and bite the bullet for a new set,

Used some muck off to give the bike a better clean today though, pretty happy with results

Try Halfords for socket sets

Cheers dude much more reasonable than B&Q,
http://www.halfords.com/webapp/wcs/stor ... yId_255215
Just to check this does have the 8mm, 12mm, and 17mm I need right don't really get the 3/8-1/4 thingys aha,

Cheers

Tom

MagicSeaweed wrote:Cheers dude much more reasonable than B&Q,
http://www.halfords.com/webapp/wcs/stor ... yId_255215
Just to check this does have the 8mm, 12mm, and 17mm I need right don't really get the 3/8-1/4 thingys aha,

Cheers

Tom

Can't complained at that price

MagicSeaweed wrote:

Gave everything a good check today, brake fluids, coolants etc,

Finally managed to get the 10w30 engine oil but turns out my ratchet set has been plundered and most are missing ,

Gonna have to make a run to B&Q tomorrow and bite the bullet for a new set,

Used some muck off to give the bike a better clean today though, pretty happy with results

Nice and shiney!

Just finished my oil change,

Used Castrol


Drainage was fun aha (never done this before),

Managed to only get 500-600ml out, :/ didnt think it was running so low, then refilled using 750ml to get the stick to show at top

Got new tyres fitted today (city grips)
Added some decals to

MagicSeaweed wrote:Got new tyres fitted today (city grips)
Added some decals to

Tidy looking bike

I like the decals, where did you get them? Can you provide a link?

Yh sure, they were a French import http://www.ebay.co.uk/itm/120921109118? ... 1423.l2649