Page 1 of 1
					
				BrAtKo's Honda PCX 150 (2014)
				Posted: Wed May 07, 2014 3:04 am
				by BrAtKo
				Hello dear community,
I'm new user of this forum as new owner of the latest brand new white PCX150. I've owned already these scooters, Piaggio ZIP 50 and Honda Vision 110. I like to cruise around the countries around here (Slovakia, Austria, Hungary, Czech). I'd like to present to you my little mods on the PCX and show you the pictures from my trips as well.
First impressions of LED lights - WOW, very very strong.
I have PCX from monday 5th May and I've already made these changes:
- Honda's case trunk modification to fit Givi/Kappa monolock plate for Kappa K35BMAL white top case
- changed handle bar position (moved forward)
- installed Interphone ball mount for iPhone case in the center of handlebar
- white reflexive straps placed on tires and stickers placed to topcase and under frontlights
- grindes the grooves for the charging cable to front cabinet and its doors
- i was trying to install Ermax+25 but I was not able to detach plastic cover from PCX to open winshield mount place
My album 
http://bratko.rajce.idnes.cz/Honda_PCX
 
Honda 08L70-KZY-910 + Kappa monolock plate modification:
 
 
 
 
Modifying the front cabinet for charging cable to mobile/GPS:
 
 
 
 
 
 
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Wed May 07, 2014 6:49 am
				by willajabir
				Nice mods and pics. Looks like you are ready for a trip, if you can stop adding mods..hahaha
I did similar mod for the GPS on the Forza, but I made the cuts on the bottom so water wouldn't leak in.
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Wed May 07, 2014 10:12 am
				by BrAtKo
				Hi. I've decided to lead cable by top cos there is wider space on the door on outside (white color coated door).
I've tried to mount Ermax 25+ for previous model of pcx - THIS DOES NOT FIT !!!
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Wed May 07, 2014 10:58 am
				by wei2go
				Pity about the Ermax. If you're willing to donate it to me for free, I'd be more than happy to take it off your hands. I'll even pay for postage :p
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Wed May 07, 2014 12:23 pm
				by BrAtKo
				wei2go You made me laugh very loud 

 
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Sun May 11, 2014 11:53 am
				by BrAtKo
				Yeah I'm over break in period, from Monday until Sunday 1094km total I'm ready to go to first service.
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Sun May 11, 2014 1:05 pm
				by WhiteNoise
				Very nice scoot from what I could see. Might be my iPad because I had problems viewing your pics following the link you provided. The 1 or 2 photo's froze my screen. Made me shut down. Just saying.
Sure Looks slick in White!  

 
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Sun May 11, 2014 2:54 pm
				by BrAtKo
				Thank You. Sorry I cannot edit my topics back. Please use this link 
http://bratko.rajce.idnes.cz/Honda_PCX to see pics in highres. Anyway I've been driving last 50km in heavy rain today and no problem with front case mod I've made - no drop of water.
 
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Sun May 11, 2014 7:33 pm
				by willajabir
				Good to hear. That also shows you making a close tolerance fit.
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Mon Jun 02, 2014 11:05 am
				by BrAtKo
				Hi guys it's time for second service cos 3600km is reached. I've started riding 10th May. Some photo from pcx event in Czech with 40 pcxs.
			
		
				
			
 
						- ImageUploadedByTapatalk1401725107.042378.jpg (330.99 KiB) Viewed 6475 times
 
		
		
		
			  
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Mon Jun 02, 2014 4:19 pm
				by maddiedog
				BrAtKo wrote: Some photo from pcx event in Czech with 40 pcxs.
Wow, very cool picture! The most PCXes I've seen in one place is 4, and one of them was mine!  

 
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Tue Jun 03, 2014 9:59 am
				by BrAtKo
				Close to complete group (some of has been already in garage).
			
		
				
			
 
						- ImageUploadedByTapatalk1401807555.995100.jpg (160.36 KiB) Viewed 6435 times
 
		
		
		
			  
			 
			
					
				BrAtKo's Honda PCX 150 (2014)
				Posted: Sat Aug 09, 2014 2:17 pm
				by BrAtKo
				Hi all from 5th May until 9th august - after 3 months, I have 8000km over and I spent on the service 8000km exactly 62€ because I asked to check air filter and replace if dirty.
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Sat Aug 09, 2014 8:15 pm
				by Duggle
				BrAtKo wrote:Close to complete group
That is super cool!  Must have been a fun event.
 
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Tue Sep 16, 2014 2:05 pm
				by pcxpower
				
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Tue Sep 16, 2014 2:25 pm
				by homie
				A new 2015PCX owner!... Awesome that makes 15 members. Nice accessories, I went a different direction with the phone charger (through the floor of the glove box and back up the steering column) with the rest of the cabling. But hey you guys like to go out the front of the door 

Adding you to the short list of 2015 owners parade.
 
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Tue Sep 16, 2014 3:39 pm
				by homie
				Now you have me looking at factory preset handlebar angles. These are mine and they are slightly off the fork angle. I would like to see how far forward you moved your handlebars and why? I may move mine inline with the fork and actually bring the grips down a little. I'm curious if others have this same factory position or are they all over the place at Honda.
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Tue Sep 16, 2014 5:47 pm
				by you you
				homie wrote:Now you have me looking at factory preset handlebar angles. These are mine and they are slightly off the fork angle. I would like to see how far forward you moved your handlebars and why? I may move mine inline with the fork and actually bring the grips down a little. I'm curious if others have this same factory position or are they all over the place at Honda.
Just adjust them to your liking?
 
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Sun Mar 08, 2015 11:12 am
				by BrAtKo
				Hello this is Ermax windshield.
			
		
				
			
 
						- ImageUploadedByTapatalk1425831117.692579.jpg (407.25 KiB) Viewed 5144 times
 
		
		
		
			  
			 
			
					
				Re: BrAtKo's Honda PCX 150 (2014)
				Posted: Mon Mar 23, 2015 11:08 am
				by BrAtKo
				Hello all, I've replaced my lovely PCX by Honda NC750S DCT finally. I wish you all all the best and fancy season with your scooters... Bye.