The Honda PCX / Forza / ADV150 / SH Forums

Gained approximately 2-2.5 inches in legroom, took some quick pics in the garage - too much stuff from another project to pull it out this minute. Notes:

1. This was an expensive project, but only because I used very high quality leather and french seams. The same seat in vinyl would be much less expensive because of material savings and labor if french seams are not used.
2. With the increase in legroom my seated position is so much more comfortable that I've already forgotten about the $$ spent.
3. I will take more pictures soon so you can compare the seat humps side by side.
4. This was done re-using the original seat pan.
5. Seat re-install was 3 to 4 minutes.
6. I am 6'2" with a 34 inch inseam and some beat up knees from sports, so any legroom additional is very welcome / important.

That looks good wineguy.
Now for a road test and let the butt tell you if the adjustment is good for it too!!!
I'm about 3" shorter than you, so the seat is ok as far as fit.
BTW, I ordered the back rest with my topcase. Waiting on it to be delivered now.

willajabir wrote:That looks good wineguy.
Now for a road test and let the butt tell you if the adjustment is good for it too!!!
I'm about 3" shorter than you, so the seat is ok as far as fit.
BTW, I ordered the back rest with my topcase. Waiting on it to be delivered now.

Thank you Larry... if I can get this damn shed painted I will get out and ride before it rains, otherwise it'll be tomorrow. I've spend a little time sitting on it but as you say I need to get it out on the road for the real test.

I've been thinking about the backrest - this time I'll let YOU talk ME into spending some $$.

That looks really neat

That looks very good, nice job.

Do you have pics with the original seat with hump removed.

At first try, i wanted to remove it, but now, i m almost used to it.
But sometimes, i lack of space, so after the rear shocks improvement, that can be another things to do.

Hoyt wrote:That looks very good, nice job.

Do you have pics with the original seat with hump removed.

At first try, i wanted to remove it, but now, i m almost used to it.
But sometimes, i lack of space, so after the rear shocks improvement, that can be another things to do.

Not a great pic Hoyt, lighting was poor, but you can see the hump that is in the pan itself, which is what my guy used as the new back support. Depending on how an upholsterer pads it, you can increase your leg room by 2 to 3 inches.

Really, a beautiful job. Congrats!! I will pass a link to this thread to others that are afraid to purchase a Forza due to legroom issues...you nailed it.

MichRocks wrote:Really, a beautiful job. Congrats!! I will pass a link to this thread to others that are afraid to purchase a Forza due to legroom issues...you nailed it.

Thank you... it's ironic that the seat looks very complicated but once you remove the hump you realize how easy of a job this is.

If potential owners really like the Forza, the $$ spent on a quick seat fix are well worth it.

Great result!

Like it. Wonder if the 2015/16 Forza will go all PCX and remove the hump entirely ?

Thanks for sharing.

looks classy!!! Im 6'4" and would certainly benefit from this mod. but I do like to put my feet up on the high floorboards and use the stock back rest for support. I have gotten used to the seat the way it is but yours looks really good. Hmmmm...........

Looks great. I'm 6'3" and mostly all leg. If I can't get comfortable with the stock seat I may try to commission you to make me one like yours. Really great job on the fit and finish.

forza300 wrote:Like it. Wonder if the 2015/16 Forza will go all PCX and remove the hump entirely ?

Thanks for sharing.

If they do I'm buying one!
For as big as that seat looks...there ain't much there!
And just can't bring myself to put a whoopee cushion Airhawk on my scoot. I have to walk up to it every day...looking at it.
This winter (only if I'm snowed off of the roads) I may take this picture and go to a shop for a rebuilt seat w/o the hump.
Fish

Here is the seat in attachment.

I brought the forza to the seat dealer, but he thinks its better to just do a better hump (smaller for passager, and softer for driver). I will try to ride a little with no hump to decide.
Im not so tall (1.75m) but its great to move backward a little.

No indication of year, pcx or forza.... booooooooooo
Seat looks great... but on what?

homie wrote:No indication of year, pcx or forza.... booooooooooo
Seat looks great... but on what?

It does say forza on the side of the bike...

My local upholster (does a lot of motorcycle seats and has done some PCX humps) says he will redo the seats and eliminate the humps for about $150. The legroom is fine for my height but it seems like a good option if needed.

you you wrote:

homie wrote:No indication of year, pcx or forza.... booooooooooo
Seat looks great... but on what?

It does say forza on the side of the bike...

And Thrasher?

SECoda wrote:My local upholster (does a lot of motorcycle seats and has done some PCX humps) says he will redo the seats and eliminate the humps for about $150. The legroom is fine for my height but it seems like a good option if needed.

$150 is a really good price !
I have to test more, i feel better with no hump.

No indication of year, pcx or forza.... booooooooooo
Seat looks great... but on what?

Forza section is about forza

Hoyt wrote:

No indication of year, pcx or forza.... booooooooooo
Seat looks great... but on what?

Forza section is about forza

oh sorry... fail, i'm off