Page 1 of 1
pcx 150 windshield
Posted: Tue Oct 20, 2015 8:32 am
by Island18
Sold my 2011 pcx 125, because I need to use the hwy, but mainly because the Givi windshield sent the blast direct to my face
I have the chance to buy a 2013 pcx 150 with 46 miles, but need to know if there is a tallest windshield for this scooter
thank you in advance!
Re: pcx 150 windshield
Posted: Tue Oct 20, 2015 10:15 am
by Oyabun
The stock shield is the same on both the 125 and 150.
You can buy aftermarket (Givi, Kappa, etc) windscreens in different sizes.
A large enough one what pushes the wind all above your head might be practical in the city, but a bit too tall at the hwy. Plus I've found that while wind cleans the helmet screen clear it might not do it with the tall windscreen.
Re: pcx 150 windshield
Posted: Tue Oct 20, 2015 4:46 pm
by j.d.b.
I have this one:
http://www.nationalcycle.com/n20052.html It's their tallest one. Very happy with it. I'm 5'8" and it comes up about mouth-height, so JUST enough.
Another inch or so would have made it ideal.
Re: pcx 150 windshield
Posted: Wed Oct 21, 2015 1:52 pm
by Island18
My problem is that the only one from Givi ( D 322ST ) for 2013 PCX 150 , installed 0n the 125, is neck hight, so I need something higher, 4 or 5 inches more
Can somebody please give me the hight for the Givi D 322ST?
is not showing on Givi website,
Thank you in advice
Re: pcx 150 windshield
Posted: Wed Oct 21, 2015 8:43 pm
by Island18
Sorry,forgot to mention. The 125 I sold had the Givi windshield, I'm 5'7" the Givi was below my face. Givi and National are using different ways to mesure so I don't know what to do
Re: pcx 150 windshield
Posted: Thu Oct 22, 2015 11:13 am
by j.d.b.
National measures from the top of the instrument shroud.