The Honda PCX / Forza / ADV150 / SH Forums

Hi all.

I got a Honda top box and mounting yesterday to fit today.
It came with instructions for the fitting key in box etc but there are no instructions for fitting the mounting plate to the scoot,
Does anyone know of some online guide?
Thanks.

there will be guidance someplace in this forum
a starter for 10 however is one entry I found...by gn2

"Open the seat, there's two black circular push-pin fasteners on the panel.
Push the centre of each in and they should become removeable, the panel now lifts out.
http://vstrom.info/vsri-gallery/gallery ... teners.jpg

Feeling very happy with myself,
As I'm not the greatest at anything mechanical, and struggle to work out one end of a screwdriver from another.
Top box fitted, took my time and a bout 3 hours later job done!!!!
Longest part was making the lock barrel for the bike key, was expecting another key with the lock in place!

Excellent

Pic upside down, my Forza was almost upside down yesterday, it slipped while trying to get on the centre stand. The mirror hit my shelves in the shed stopping it from going over.

You took 3 hours to rebuild your bike upside down while putting a top box on?! You're Good! I've never seen it done that way.

Will try a different pic, trouble of taking pics with an I pad.