Page 1 of 1

New Member Rollin' In

Posted: Fri Oct 26, 2012 10:49 pm
by ragin' cajun
I am a first timer here & I must say this is a really good forum...you guys & gals have some terrific content in your posts
Here's a pic of the two-wheelers in my stable... a 2002 Honda Reflex, a 2011 PCX & a 2007 Yamaha Morphous...
The Herd.JPG
The Herd.JPG (270.5 KiB) Viewed 3108 times
gotta say the PCX is the best of the bunch...it is tops in fuel economy, maneuverability, throttle response & style...Might have to thin the herd-out one of these days & get rid of a couple, but the PCX is defintely a keeper

Re: New Member Rollin' In

Posted: Sat Oct 27, 2012 4:37 pm
by gn2
ragin' cajun wrote:the PCX is defintely a keeper
You say that now, but give it a couple of years and you'll probably be bored with it.

Re: New Member Rollin' In

Posted: Sat Oct 27, 2012 5:52 pm
by Scootin'
Not bored with mine yet. Just bought one in sept one this month. Hey lets see a photo of those white hand guards from the handle bars. I cannot firgure how to mount any unless you use security ties / plastic tie wraps.

Re: New Member Rollin' In

Posted: Sat Oct 27, 2012 7:05 pm
by Scootin'
Here's Larger Picture. My son traded in his 09 Ninja650R for this 2013 Red PCX 150 then I sold my 08 Versys & bought the 2013 Black PCX150. 2013 Models only have 2 colors avialible in the US. There are FUN! Run 68 mph to rev limiters on both.

Re: New Member Rollin' In

Posted: Sat Oct 27, 2012 8:58 pm
by WhiteNoise
Welcome ragin' good to hear from you. Your scoot is looking cool ;)

Re: New Member Rollin' In

Posted: Sat Oct 27, 2012 11:41 pm
by ragin' cajun
Scootin' wrote:Not bored with mine yet. Just bought one in sept one this month. Hey lets see a photo of those white hand guards from the handle bars. I cannot firgure how to mount any unless you use security ties / plastic tie wraps.

here are pics of the handguards with the mounting hardware that came with them... the mounting hardware can be purchased separately in chrome or black finish
$(KGrHqZ,!i4E6HdYq3PVBOj2bIc1zQ~~60_12.jpg
$(KGrHqZ,!i4E6HdYq3PVBOj2bIc1zQ~~60_12.jpg (39.48 KiB) Viewed 3065 times
$(KGrHqEOKjME6PUr5foVBOj2bMiF,w~~60_12.jpg
$(KGrHqEOKjME6PUr5foVBOj2bMiF,w~~60_12.jpg (42.73 KiB) Viewed 3065 times
IMGP2192.JPG
IMGP2192.JPG (73.62 KiB) Viewed 3065 times
IMGP2193.JPG
IMGP2193.JPG (62.16 KiB) Viewed 3065 times
IMGP2194.JPG
IMGP2194.JPG (64.55 KiB) Viewed 3065 times
IMGP2197.JPG
IMGP2197.JPG (59.63 KiB) Viewed 3065 times

Re: New Member Rollin' In

Posted: Mon Oct 29, 2012 3:12 pm
by maddiedog
Where'd you order the handguards from? They look really cool.

Re: New Member Rollin' In

Posted: Mon Oct 29, 2012 9:16 pm
by ItsaHonda
Welcome Ragin Cajun! I am originally from New Orleans... I may consider a backroads ride to Louisiana on the PCX at some point, it's about a 650 mile ride from my current home in Orlando. I have the Burgman for the long distance touring rides, but I really like the idea of doing at least one or a couple long trips on the little Honda...especially after reading some of the stories on here!

We have a guy in our local Orlando scooter club (Orlando Scooter Society) who has a Piaggio Fly 150 and he's put over 15,000 miles on that thing in less than 6 months! His biggest trip was from Orlando, Florida to Wisconsin (for a rally they had up there), followed by a ride from FL to Tennessee for a rally and most recently to Panama city (which is about a 350 one way ride from Orlando) for another rally. His trips and pictures can be found at our web site www.OrlandoScooterSociety.com. We are having our own rally in November 16th-18th, btw.

Re: New Member Rollin' In

Posted: Tue Oct 30, 2012 8:58 am
by rainburg
Maddie,

I believe those handguards have been discontinued, but you may still be able to find them online. Here is a pair on Amazon, but the color is probably not to your liking:

http://www.amazon.com/Polisport-Free-Fl ... handguards

Re: New Member Rollin' In

Posted: Tue Oct 30, 2012 9:35 am
by rainburg
Looks like white is still available:

http://www.amazon.com/POLISPORT-CHEST-P ... Handguards

Re: New Member Rollin' In

Posted: Tue Oct 30, 2012 9:59 am
by maddiedog
^ Thanks rainburg. I added them to my Christmas list. :D

Re: New Member Rollin' In

Posted: Tue Oct 30, 2012 1:06 pm
by rainburg
They were on my Christmas list last year :lol: But we haven't installed them yet :oops: I suspect you need to move the break levers over just slightly to make it work. Now that it is getting colder and I have good photo references I think we'll make it a priority to get them on.

Re: New Member Rollin' In

Posted: Wed Oct 31, 2012 12:31 am
by ragin' cajun
maddiedog wrote:Where'd you order the handguards from? They look really cool.
hey maddiedog...bought the handguards at an ebay auction last year for $17 from a private seller...they were used but in great shape

Re: New Member Rollin' In

Posted: Wed Oct 31, 2012 12:38 am
by ragin' cajun
ItsaHonda wrote:Welcome Ragin Cajun! I am originally from New Orleans... I may consider a backroads ride to Louisiana on the PCX at some point, it's about a 650 mile ride from my current home in Orlando. I have the Burgman for the long distance touring rides, but I really like the idea of doing at least one or a couple long trips on the little Honda...especially after reading some of the stories on here!

We have a guy in our local Orlando scooter club (Orlando Scooter Society) who has a Piaggio Fly 150 and he's put over 15,000 miles on that thing in less than 6 months! His biggest trip was from Orlando, Florida to Wisconsin (for a rally they had up there), followed by a ride from FL to Tennessee for a rally and most recently to Panama city (which is about a 350 one way ride from Orlando) for another rally. His trips and pictures can be found at our web site http://www.OrlandoScooterSociety.com. We are having our own rally in November 16th-18th, btw.
hey ItsaHonda... thanks for the website...wouldn't mind an extended trip myself

Re: New Member Rollin' In

Posted: Wed Oct 31, 2012 12:42 am
by ragin' cajun
rainburg wrote:They were on my Christmas list last year :lol: But we haven't installed them yet :oops: I suspect you need to move the break levers over just slightly to make it work. Now that it is getting colder and I have good photo references I think we'll make it a priority to get them on.
hey rainburg...you are correct...the brake levers did require minor position adjustments to accomodate the handguards

Re: New Member Rollin' In

Posted: Tue Jun 04, 2013 3:39 pm
by tildarama1
Hi,

I bought my self some polisport freeflow handguards:

http://www.amazon.co.uk/Polisport-Freef ... t+freeflow

I saw a PCX with these fitted and thought they looked pretty awesome.

I went out today to fit them but am having trouble working out how.

Can anyone who has them fitted please assist, possibly with pictures?

It looks as though you may have to 'move' the brake levers and fittings across slightly (1/2 a cm but I was unsure whether this would affect anything so did not attempt it)? I am not very scooter maintenance savy so am unsure as to how to fit them.

THANK YOU

Re: New Member Rollin' In

Posted: Tue Jun 04, 2013 8:44 pm
by ragin' cajun
hey tildarama1..
to install the handguards you will have to move the brake lever assy on the left side as well as the right...once the handguards are in place you will have to adjust the mirrors as needed to allow rear view vision...heres a pick of the left side installed showing the switch assy along side the the handguard c-clamp & the brake lever c-clamp
IMGP2192.JPG
IMGP2192.JPG (113.53 KiB) Viewed 2514 times

Re: New Member Rollin' In

Posted: Tue Jun 04, 2013 11:38 pm
by Taz
I take it you can't use the stearing lock with these handguards installed?

Re: New Member Rollin' In

Posted: Wed Jun 05, 2013 9:04 am
by tildarama1
ragin' cajun wrote:hey tildarama1..
to install the handguards you will have to move the brake lever assy on the left side as well as the right...once the handguards are in place you will have to adjust the mirrors as needed to allow rear view vision...heres a pick of the left side installed showing the switch assy along side the the handguard c-clamp & the brake lever c-clamp
IMGP2192.JPG
Thanks ragin'

Just didn't wanna move something I wasn't supposed to and break my new scoot after only 50 miles :)

Will update when I have them installed.

Re: New Member Rollin' In

Posted: Wed Jun 05, 2013 3:17 pm
by BattlebornScooterist
Welcome! As another newcomer I greet you as a fellow rider and soon to be PCX owner. 8)

I like your stable, a glimpse into my future.....