The Honda PCX / Forza / ADV150 / SH Forums

After some searching and reading I'm going with the NCY Variator, drive face and 13g rollers.
There is a speed indicator at a local work area that I can use to verify and document my speed.

The reason I'm doing this is the 5mph top speed over posted limit is written on my registration card.

Maryland just changed to rules for motorcycles. Your top speed has to be 5mph over the posted limit. So that keeps me off of 65mph highways. I want to have a top speed of 70+, so I'm legal on 65mph posted highways. Which Variator Roller kit should I buy ?. A link would be nice !
2013 PCX150

My 2013 has a light valve tap when I first start it. Once its warm it disappears. I checked the valve adjustment and they where in spec. .004-,009
Is this normal ?

Repacked my bearings and sanded clutch pads today. At 2775 miles the bearing were fine, but very little grease on them, it it was almost black. Used High temp bearing grease to repack both bearings. Decided not to use excessive grease, just enough to flush the bearings. plan on inspection and repack...

Since this is a know issue in the 2013 model, I was wondering if the bearings can be greased as a preventative item.

Thanks, 8mm

Just completed valve adjustment on my 2013. It only had 2700 miles on it when I bought it in May. The original owner only changed the oil, so I had a lot of maintenance items to catch up on. It is a "total pain in the ass" to disassemble/assemble the plastic, took me almost 5 hours to comp...

My new to me 2013 PCX150 has 2700 miles on it. When I first start it there is a little valve noise for about 2 minutes. Then its perfectly quite. The original owner had done nothing but yearly oil changes. I am going to go ahead and adjust the valves once then forget about it unless they get load. T...

Purchased a 2013 PCX150 a couple weeks ago.
Really wanted a windshield and decided to get the expensive factory type.
I really liked the appearance of the OEM over the available aftermarket.