2013 PCX greasing clutch pack bearings ?

[8milimeter]

Since this is a know issue in the 2013 model, I was wondering if the bearings can be greased as a preventative item.

Thanks, 8mm

[mymitzi]

Yes but..........before it's noisy. Rode the PCX allot of miles....50K....before changing mine.

[8milimeter]

Repacked my bearings and sanded clutch pads today. At 2775 miles the bearing were fine, but very little grease on them, it it was almost black. Used High temp bearing grease to repack both bearings. Decided not to use excessive grease, just enough to flush the bearings. plan on inspection and repack every 2500 miles.

[pcx888]

I just pushed out bearings and replaced with new ones. And add high temp waterproof grease.

[jburner]

I just pushed out bearings and replaced with new ones. And add high temp waterproof grease.

Any links to what bearings you replaced with or how you pushed the old ones out? Debating on repairing just bearings or getting a new face for $50