windshield removal
Moderator: Modsquad
-
- New Member
- Posts: 32
- Joined: Sat Jun 27, 2015 8:48 am
- Year: 2015
- Color: Pearl White
- Location: Boyertown, PA
windshield removal
How difficult is it to replace the OEM windshield on a 2015 PCX-150 with something taller? Currently the wind hits me squarely in the chest. BTW, I'm 5'-10" (178cm) tall.
Ride on and leave only tire tracks.
Jim
'15 Honda PCX 150
Pearl White
Motori Tec Inc. Performance Variator w/ 14g rollers
ContiScoot tires - safety recalled
Avon Viper tires
'08 Q'link Pegasus (traded in @ 12,000 miles)
Jim
'15 Honda PCX 150
Pearl White
Motori Tec Inc. Performance Variator w/ 14g rollers
ContiScoot tires - safety recalled
Avon Viper tires
'08 Q'link Pegasus (traded in @ 12,000 miles)
-
- Regular User
- Posts: 123
- Joined: Mon Jan 19, 2015 3:25 am
- Year: 2015
- Color: Silver
- Location: Chiang Mai, Thailand
Re: windshield removal
Very easy to install
Take a look here - http://www.hondapcx.org/viewtopic.php?f=3&t=7278
Lots of posts about which is the best windshield for your height
Take a look here - http://www.hondapcx.org/viewtopic.php?f=3&t=7278
Lots of posts about which is the best windshield for your height
-
- Frequent Poster
- Posts: 1830
- Joined: Wed Jun 10, 2015 4:30 pm
- Year: 18 300 xmax
- Color: White
- Location: Fort lauderdale
- Contact:
Re: windshield removal
Two screws, a few 10mm bolts, 10 min swap.....
Glen
‘15 PCX build thread here:
https://www.hondapcx.org/viewtopic.php?f=2&t=4640
Current: ‘18 XMAX 300 & ‘22 NAVI
‘15 PCX build thread here:
https://www.hondapcx.org/viewtopic.php?f=2&t=4640
Current: ‘18 XMAX 300 & ‘22 NAVI
- Mel46
- Forum Benefactor
- Posts: 6964
- Joined: Tue Nov 13, 2012 5:13 pm
- Year: 2013
- Color: red PCX
- Location: Dallas, Ga USA
Re: windshield removal
I have a 2013 model, which is a little different, but I have changed out windshields many times. There is much to it. First I removed the trim that covers up the 4 bolts that hold the windshield on. The trim is held on by two screws and some clips. After that, it is easy...just remove the bolts. That's it. Put it back together in reverse order.
So, just find the windshield you want, and then just go for it.
So, just find the windshield you want, and then just go for it.
Currently own:
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
- pendulum
- New Member
- Posts: 15
- Joined: Mon Oct 02, 2017 5:50 pm
- Year: 2015
- Color: white
- Location: Vaughn, WA
Re: windshield removal
Something that stumped me for a bit was how to remove that front trim piece without breaking it.
After you remove those two screws you want to slide the trim piece down. Do not pry it upward or outward.
After you do it the first time, it's a 10 minute job. And I'm sure more than a handful of us switch screens for seasons too. ;-)
Good luck!
After you remove those two screws you want to slide the trim piece down. Do not pry it upward or outward.
After you do it the first time, it's a 10 minute job. And I'm sure more than a handful of us switch screens for seasons too. ;-)
Good luck!
2015 PCX 150
Dr Pulley 13g
Yoshi SS exh
Dr Pulley 13g
Yoshi SS exh