Just thought I would put my own experience with the Forza 300 to this point, the bike is very good at what it was designed for however its quality is not what ive expected from Honda, first up my wing mirrors worked slightly loose so that you could not see much behind you while riding from vibrations, sorted this by squeezing some plastic strips in the gaps
a bodge yes but it works.Second the fuel lid wont open unless i push behind the hinge on the plastic, following this came the juddering at around 4k mileage when starting off with a cold engine like trying to start off in third gear in a car and still feels like a slipping clutch when warm only not as bad, Im at 4700 miles now and gave it a good clean to be put away for the winter, now we have had no ice or snow so no salt and the bike was bought in March 2019, surprise, corrosion on the exhaust end can around both welds at each end and corrosion starting on the offside rear shock, the bike was cleaned regularly and ACF50 was used liberally.
I know, take it to Honda but my local dealer closed and the nearest are 30 and 45 miles away, Im now thinking of getting rid and am looking at a DL650 instead, I could just paint the exhaust and clean out the drive belt and clutch pads and maybe replace the shock but i did not expect to have to do this on a scoot that is 9 months old and only used to commute to work.
My 16 plate CB500F had nearly 11k on it when i traded it in for this scoot, I had no real problems with that bike and the exhaust was painted the same but showed no corrosion even at 11k.
Any way just my own experience on this bike.
Have a great year all.
Mark
