Mirrors

The Poacher · Post by **The Poacher** » Mon Sep 11, 2017 6:27 am

Need to get some of these, where did you find them?

Mel46 · Post by **Mel46** » Mon Sep 11, 2017 12:13 pm

It doesn't look to me like mirror extenders are that difficult to make. Here is a picture of mine. I purchased these online. They are Givi so they are stout, but it seems to me that you could make them out of thick aluminum. You just have to match the threads for the mirror, where it normally screws in, so that you can purchase bolts to hold the extenders in. Then get a lockout for the mirror as well.

GeorgeSK · Post by **GeorgeSK** » Mon Sep 11, 2017 3:05 pm

Aren't the mirror shafts left-hand thread? Making extenders would not be that tricky, but finding LH metric taps could be humorous, at least in the US.

you you · Post by **you you** » Mon Sep 11, 2017 3:21 pm

The Poacher wrote:Need to get some of these, where did you find them?

eBay. CB500x R&G mirror extenders. About £11.50. Tried them today and they work perfectly.

lolofigo · Post by **lolofigo** » Tue Sep 12, 2017 11:13 am

you you wrote:
The Poacher wrote:Need to get some of these, where did you find them?

eBay. CB500x R&G mirror extenders. About £11.50. Tried them today and they work perfectly.

M10 x 1.25 ?

Sent from my SM-N9005 using Tapatalk

you you · Post by **you you** » Tue Sep 12, 2017 3:07 pm

lolofigo wrote:
you you wrote:
The Poacher wrote:Need to get some of these, where did you find them?

eBay. CB500x R&G mirror extenders. About £11.50. Tried them today and they work perfectly.
M10 x 1.25 ?

Dunno. I just searched for the cb500x mirrors and there were about half a dozen vendors selling them. Ill see if i can find a link

Sent from my SM-N9005 using Tapatalk

you you · Post by **you you** » Tue Sep 12, 2017 3:11 pm

Does this work?

291737824958

This is the item number

Mel46 · Post by **Mel46** » Tue Sep 12, 2017 5:44 pm

You know what else works??... Ride-by-proxy. :-) Maybe you can find a small Asian to ride for you. Honda DID make it for them, you know. :-) (I just had to say that. Couldn't help myself.)

you you · Post by **you you** » Tue Sep 12, 2017 6:09 pm

Mel46 wrote:You know what else works??... Ride-by-proxy. :-) Maybe you can find a small Asian to ride for you. Honda DID make it for them, you know. :-) (I just had to say that. Couldn't help myself.)

Oohkaaay. That's fine Mel

Is there anything you need to tell us

springer1 · Post by **springer1** » Wed Sep 13, 2017 3:54 pm

Here's the CB500X mirrors (on right for comparison) I got from a salvage off Eb*y. A real improvement, I can't say if its better than extensions or vice- versa, but definitely better than the stock ones.

you you · Post by **you you** » Wed Sep 13, 2017 5:33 pm

springer1 wrote:Here's the CB500X mirrors (on right for comparison) I got from a salvage off Eb*y. A real improvement, I can't say if its better than extensions or vice- versa, but definitely better than the stock ones.

They look about the same height but wider? The extensions make the mirrors taller but not wider.

Perhaps the ideal would be both?

How much did they cost?

springer1 · Post by **springer1** » Wed Sep 13, 2017 6:33 pm

They look about the same height but wider? The extensions make the mirrors taller but not wider.

Perhaps the ideal would be both?

How much did they cost?

The CB500X stems bend sharper to horizontal so the mirrors are lower & farther out - not a lot, maybe .75" - 1.0" out more. But they are more square so give better vision to the rear. The tapered outer 1" of the PCX mirrors are only for style & fashion rather than efficient use. The set cost me $35 & free shipping used from a salvage place on eb*y. They are nice, obviously not new, but nice.

AC_ING · Post by **AC_ING** » Sun Aug 07, 2022 3:35 pm

My left mirror is broke, so I purchase on eBay a 2011 OEM Honda replacement thats is 10mm but the thread didn't match since my PCX is 2018.

So, now I was thinking on change both since the OEM fails and there is a lot of universal mirror I am looking now but how can I be sure it will fit ?

Ranger2020 · Post by **Ranger2020** » Thu Aug 11, 2022 7:49 am

I bought a pair of extenders off of ebay. aprox $35 w/ hardware. On my 2021, both mirrors had left hand threads.

AC_ING · Post by **AC_ING** » Thu Aug 11, 2022 8:06 pm

I dont know if threads change after years, but I guess is different on each side so the wind dont move the mirros.

Can you tell me what model did you buy ?

I saw one with multi adapters on amazon, https://www.amazon.com/-/es/gp/product/ ... 11Q4&psc=1 but I'm still not sure they work.

Ranger2020 wrote: ↑Thu Aug 11, 2022 7:49 am I bought a pair of extenders off of ebay. aprox $35 w/ hardware. On my 2021, both mirrors had left hand threads.

Ranger2020 · Post by **Ranger2020** » Tue Aug 16, 2022 7:26 am

The adapters I bought were listed for a Yamaha motorcycle. The bolt that holds adapter to bike is reverse thread & the threads in adapter for mirror are also left hand. Are available in chrome or black. $15.00 each.

slowfast · Post by **slowfast** » Sat Sep 09, 2023 3:08 pm

AC_ING wrote: ↑Thu Aug 11, 2022 8:06 pm I dont know if threads change after years, but I guess is different on each side so the wind dont move the mirros.

Can you tell me what model did you buy ?

I saw one with multi adapters on amazon, https://www.amazon.com/-/es/gp/product/ ... 11Q4&psc=1 but I'm still not sure they work.

Ranger2020 wrote: ↑Thu Aug 11, 2022 7:49 am I bought a pair of extenders off of ebay. aprox $35 w/ hardware. On my 2021, both mirrors had left hand threads.

Did these mirrors, Mamiko brand, work?

Seems the ones i have now (not original owner of my Honda 2016 PCX) are counter clockwise. Looking to replace right side mirror.

The Honda PCX / Forza / ADV150 / SH Forums

Mirrors

Re: Mirrors

Re: Mirrors

Re: Mirrors

Re: Mirrors

Re: Mirrors

Re: Mirrors

Re: Mirrors

Re: Mirrors

Re: Mirrors

Re: Mirrors

Re: Mirrors

Re: Mirrors

Help with Mirrors

Re: Mirrors

Re: Mirrors

Re: Mirrors

Re: Mirrors