Quick question, what's the best way to support the PCX to enable the front wheel to be removed, considering the belly-pan is plastic and may crumple if placed on blocks?
Cheers
![Smile :)](./images/smilies/icon_e_smile.gif)
Moderator: Modsquad
Yes,Pcx Racing wrote:for the better is the scooter on the center stand and a crik wheeler scooter under the
Exactly what I do. It pivots on the centerstand very easily.Mgalutia88 wrote:Put a wood block on your jack and lift up from the front of the pan while your on the center stand. Run the block or 2x4 scrap perpendicular to the bike across the bottom. This will disperse the weight. Throw a microfiber rag across the piece of wood to protect the paint.
Mel46 wrote:I cheat. I have an I-beam in my basement that goes the length of it and helps hold up the house. I can just throw a rope over it and attach the ends to the handle bars.
I do something similar and use a ratchet strap over the garage roller door support bracketMel46 wrote:I cheat. I have an I-beam in my basement that goes the length of it and helps hold up the house. I can just throw a rope over it and attach the ends to the handle bars.
This is what I do. The I-beam in my basement has an ATV winch on it, and I just crank the front end into the air.Mel46 wrote:I cheat. I have an I-beam in my basement that goes the length of it and helps hold up the house. I can just throw a rope over it and attach the ends to the handle bars.