PCX Windscreen list

[dustin91]

Dust, if it's like UPS here, sometimes a shipper will create a manifest or tracking number, which is correct, but the shipper won't register the shipment until they have the product in hand. It's possible it will be available to track in a day or two.

[Dustoff66]

As of today it's over a month since I ordered my Ermax from redracing in Italy. After several failed attempts to track using the number on the waybill I sent e-mail to them asking for tracking from their end or a refund. I got a reply saying that the Posteitaliane numbers on those waybills are not trackable but that the service assured that I'd receive it "within the next week". So -- there's mail service that's actually slower and less efficient than the USPS --- who knew?
I suppose if it doesn't arrive I'm out the $125; my Mastercard issuer has way too many hoops to jump through. My patience is wearing thin.

[you you]

As of today it's over a month since I ordered my Ermax from redracing in Italy. After several failed attempts to track using the number on the waybill I sent e-mail to them asking for tracking from their end or a refund. I got a reply saying that the Posteitaliane numbers on those waybills are not trackable but that the service assured that I'd receive it "within the next week". So -- there's mail service that's actually slower and less efficient than the USPS --- who knew?
I suppose if it doesn't arrive I'm out the $125; my Mastercard issuer has way too many hoops to jump through. My patience is wearing thin.

Bloody Italians

[gn2]

Unusual.
Normally Italy only shuts for the summer, maybe they've closed early this year?

[dustin91]

Sorry to hear about that, Dust. I installed my Givi 323 on Wed morning, and went out for a ride that afternoon, but it was just WAY too cross- windy for me to feel safe. Screen or not, I wouldn't have gone out in those conditions. So hopefully I can get in a short ride later today to really test it out. But on a quick test run around the cul-de-sac, looking through the screen didn't bother me, and it seemed as though the helmet noise was no more like standing outside in a breeze... really quite quiet. However, that was just at maybe 20 mph speeds - I really need to put it to use.

All to say, if the Italian dealer doesn't work out, and if the Givi screen performs as well as I think it will, I'd have to recommend spourttour.com to you!

[BrAtKo]

Hello all. I've tried to mount Ermax 25+ for previous model of pcx into new 2014 model - THIS DOES NOT FIT !!!

[BrAtKo]

Ermax has already new models for 2014 on their web http://www.ermax.fr/modele2-PCX_125_2014-2219.html

[BrAtKo]

Here is the Ermax for 2014/2015 models.

ImageUploadedByTapatalk1425831464.975920.jpg (407.25 KiB) Viewed 2968 times

[Valiant]

Hello all. I've tried to mount Ermax 25+ for previous model of pcx into new 2014 model - THIS DOES NOT FIT !!!

Yeah, the mounting area is evidently a little different between the two models.

[scudder]

I fitted the KAPPA 82x58cm high screen at the end of summer last year. Much more protection this year and worth every penny. Shipped promptly too for something from Italy! The Ebay number for the one I purchased if you want a look is 141113256914. Not for the 2014/5 model though.

[Mel46]

Did that Ermax come with the hinged addition or did you add it? I have never seen one like that.

[BrAtKo]

Hello the deflector I've bought separately it is Puig.

[Wab]

Hi, just thought I would let you know how I got on with the screen I fitted to my 2015 pcx 125.
I went for the Puig +18 screen mainly because I thought the design of it suited the bike and there aren't that many to choose from yet!
It was relatively easy to fit although I did manage to break one of the top clips on the front panel beneath the screen. This is easy to do so be warned!
I love the look of it but in actual use I found the wind was directed at my helmet and was so bad I have taken the screen back off. I am 5"9. It did keep it off my chest and arms though.
My advice is if you want to change the screen you will definitely need a tall one.

[Wab]

[fast1075]

I just got a new Puig touring screen. Bought it from MonsterParts. Turns out Puig has a warehouse in Orlando, and they had it shipped direct. Got it in two days from order. Out freakin standing!
I will fit it tomorrow and see how it goes. Dark tint on a black scoot, should look good too.

[abcdarko]

Just got back (while you guys were sleeping in US) from nice daily round of 250km.
Ride sucked cause my GIVI short shield was like a sail in the storm.
I got my PCX with it. As the dealers are unlike the US ones, I got free short OEM from them which the guy I bought the PCX from lost his/mine.
GIVI goes to trash. The wind from OEM shorty is kindy "healthy"real wind in your hair without surprises that GIVI does.
I am sorry now that I have ordered black from PUIG but it will be usefull in the cold days.
Tall GIVI is ok I guess for the city, but as many of you confirmed it is also bad on the road.
My opinion: do not by GIVI if not too late. BTW GIVI is not highly apreciated brand here in Europe.They have merged with KAPPA and since than they really reduced the quality of the products.
I had bad experience with GIVI while riding Piaggio Beverly few years ago: my windshield fell out of the fitting when halted on the light.

Can anyone tell if PUIG is simillar to short OEM? Does it fight the wind well?

[you you]

Just got back (while you guys were sleeping in US) from nice daily round of 250km.
Ride sucked cause my GIVI short shield was like a sail in the storm.
I got my PCX with it. As the dealers are unlike the US ones, I got free short OEM from them which the guy I bought the PCX from lost his/mine.
GIVI goes to trash. The wind from OEM shorty is kindy "healthy"real wind in your hair without surprises that GIVI does.
I am sorry now that I have ordered black from PUIG but it will be usefull in the cold days.
Tall GIVI is ok I guess for the city, but as many of you confirmed it is also bad on the road.
My opinion: do not by GIVI if not too late. BTW GIVI is not highly apreciated brand here in Europe.They have merged with KAPPA and since than they really reduced the quality of the products.
I had bad experience with GIVI while riding Piaggio Beverly few years ago: my windshield fell out of the fitting when halted on the light.

Can anyone tell if PUIG is simillar to short OEM? Does it fight the wind well?

My givi is great

[Fran]

I got the shorter Bullster screen from Secdem in smoke. Seems to work well and I like the way it looks. Takes a few days to get used to as the bike handles a bit differently, or seems to, and there is a low rumble in the helmet from the turbulence. Keeps me warmer though, including my neck. Was very easy to fit.

[Jge64]

The H2C smoke winscreen, about 3 in taller than stock, for looks only, no real protection over stock. Thats fine with me, as its an around town bike. It looks a lot better than stock:

[WhiteNoise]

I just got a new Puig touring screen. Bought it from MonsterParts. Turns out Puig has a warehouse in Orlando, and they had it shipped direct. Got it in two days from order. Out freakin standing!
I will fit it tomorrow and see how it goes. Dark tint on a black scoot, should look good too.

Shoutout to fast, are you still around? Come back and please bring a pic or two of that Puig screen mounted on your 2013. Question for me and others, does MonsterParts carry screens that'll fit the 2014/2015/2016 PCX model years?
I see you're in Central Florida, did you just walk in and buy yours? If so,....Very cool