2103 PCX Parts needed

General Honda PCX chat, questions about the PCX, or questions about riding.

Moderator: Modsquad

nacho1
New Member
New Member
Posts: 6
Joined: Wed Jun 25, 2014 1:22 pm

2103 PCX Parts needed

Post by nacho1 »

Hi there,

I live in Europe (Prague - Czech Republic)
My 2013 125PCX has been an accident and I am in the process of repairing it.
It's all cosmetic - no mechanical problems as far as I can see.

I have two questions if anyone can help me.

I am looking for the best place for new panels (body panels) full set ideally. In White.
However LHS panels are required more-so.
Complete Handlebar and LHS foot peg.

1 - Does anyone know where the best place is to get these from? In Asia or USA? (Expensive here in EU)

2- And secondly I tried to order some recently from partzilla.com and they say they do not recognise my VIN (understandably as its EU VIN) neither can they service EU models.
But I thought the PCX 125 models were the same spec in USA as Europe?

Any help gratefully received on this as I am keen to get her back on the road asap :-)

Thanks
Nacho
User avatar
Alibally
Official Moderator
Official Moderator
Posts: 1761
Joined: Thu Nov 03, 2011 5:47 pm
Year: 2019
Color: Black
Location: Edinburgh, Scotland

Re: 2103 PCX Parts needed

Post by Alibally »

The US bike differ in more ways than you think. The lights, indicators, wiring, etc etc. the US bikes also have a parking brake, no start stop and a kill switch instead.
Some of the body plastics are probably the same but you would have to compare part numbers to verify this.
Try eBay. There are quite a few body panels and parts on there you might need. They might be used but it would fix your bike up if your on a budget.
Image
nacho1
New Member
New Member
Posts: 6
Joined: Wed Jun 25, 2014 1:22 pm

Re: 2103 PCX Parts needed

Post by nacho1 »

Ok wow - well thats changed my thinking.
I will now go part number hunting :-)

Is there anywhere I can get a parts ref manual from? - I see there is a 150 Manual on here for download but I assume I'm guessing a bit again.

Thanks
Nacho
User avatar
Alibally
Official Moderator
Official Moderator
Posts: 1761
Joined: Thu Nov 03, 2011 5:47 pm
Year: 2019
Color: Black
Location: Edinburgh, Scotland

Re: 2103 PCX Parts needed

Post by Alibally »

Check out this website. It's a US website but you get the idea.
http://www.mrcycles.com/oemparts/#/l/ho ... 0-ac-parts
Image
nacho1
New Member
New Member
Posts: 6
Joined: Wed Jun 25, 2014 1:22 pm

Re: 2103 PCX Parts needed

Post by nacho1 »

Ok that works - thanks !
User avatar
gn2
Forum Benefactor
Forum Benefactor
Posts: 7768
Joined: Tue Dec 06, 2011 7:54 pm
Year: None
Location: NE Scotland

Re: 2103 PCX Parts needed

Post by gn2 »

Ebay is worth a look, lots of bits on there at good prices.
Four decades on two wheels has taught me nothing, all advice given is guaranteed to be wrong
drocca
New Member
New Member
Posts: 3
Joined: Wed Jun 25, 2014 4:52 pm
Location: Moscow, Russia

Re: 2103 PCX Parts needed

Post by drocca »

For European (same as in Thai) version try here http://mototh.com/ .
Very cheap, straight from Thailand.


http://mototh.com/en/parts/29/Honda+PCX150+%282012%29
Attachments
PCX white.jpg
PCX white.jpg (288.21 KiB) Viewed 2385 times
nacho1
New Member
New Member
Posts: 6
Joined: Wed Jun 25, 2014 1:22 pm

Re: 2103 PCX Parts needed

Post by nacho1 »

Looks good - thanks I will give them a shot !
User avatar
maddiedog
Benevolent Overlord
Benevolent Overlord
Posts: 3647
Joined: Tue Nov 01, 2011 7:04 pm
Year: 2011
Color: White
Location: New Mexico
Contact:

Re: 2103 PCX Parts needed

Post by maddiedog »

partzilla.com is often cheaper than mrcycles -- keep them in mind during your search too. :)
Currently ride: Nothing right now - mostly mountain biking with my boys until they're old enough to ride :lol:
Previously rides: 2011 Honda PCX 125, 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
nacho1
New Member
New Member
Posts: 6
Joined: Wed Jun 25, 2014 1:22 pm

Re: 2103 PCX Parts needed

Post by nacho1 »

Hi again,

Does anyone know if body parts are the same for the years 2011,12 - 13 ?
Was there any changes ?

Thanks
User avatar
dasshreddar
Frequent Poster
Frequent Poster
Posts: 755
Joined: Mon Oct 15, 2012 11:34 am
Year: forzaruckuspcx
Color: black
Location: central coast california

Re: 2103 PCX Parts needed

Post by dasshreddar »

nacho1 wrote:Hi again,

Does anyone know if body parts are the same for the years 2011,12 - 13 ?
Was there any changes ?

Thanks
Yeah the body/colored parts(white, red, etc.) are the same. I think just the fuel door is different.
nacho1
New Member
New Member
Posts: 6
Joined: Wed Jun 25, 2014 1:22 pm

Re: 2103 PCX Parts needed

Post by nacho1 »

Thats perfect

Thanks !!
Post Reply