Yuminashi mods

Drivetrain upgrades, engine upgrades, or any other mods to gain speed or acceleration.

Moderator: Modsquad

Post Reply
Pgill
New Member
New Member
Posts: 6
Joined: Mon Mar 31, 2014 11:35 am

Yuminashi mods

Post by Pgill »

Hi
Back in Febuary, I converted my wife's Pcx to 164cc, using Yuninashi pieces from RZ Racing in Holland, after removing the engine, quite straight forward, I replaced the barrel, piston, cam, fuel injector, valve springs, and the variator, and a K&N filter, I stopped short of replacing the throttle body and exhaust.
What a marked difference, managed an indicated 80 mph rock steady!
Now have to run with the idle switch off, as the new cam does not have the decompression cam on it, it does not start instantly,
Spent about £550, well worth it!!! :D
Paul.
Top
User avatar
dasshreddar
Frequent Poster
Frequent Poster
Posts: 755
Joined: Mon Oct 15, 2012 11:34 am
Year: forzaruckuspcx
Color: black
Location: central coast california

Re: Yuminashi mods

Post by dasshreddar »

welcome, 8) awesome... any pics?

I assume your in the UK with a 125 non esp?
Top
User avatar
Alibally
Official Moderator
Official Moderator
Posts: 1761
Joined: Thu Nov 03, 2011 5:47 pm
Year: 2019
Color: Black
Location: Edinburgh, Scotland

Re: Yuminashi mods

Post by Alibally »

Mmmm. Valve springs......
Image
Top
Pgill
New Member
New Member
Posts: 6
Joined: Mon Mar 31, 2014 11:35 am

Re: Yuminashi mods

Post by Pgill »

Hi
Yep a non ESP, the quality of the Yuminashi is of a high standard, everything fitted well, while the head was off I took the opertunity to polish the inlet & exhaust ports, may only give a whif of an extra horse, but I enjoyed doing it!
Paul
Top
User avatar
you you
What's a wot?
What's a wot?
Posts: 10001
Joined: Sat Jun 30, 2012 5:37 pm
Location: Between Lulu and Chichi

Re: Yuminashi mods

Post by you you »

Pgill wrote:Hi
Yep a non ESP, the quality of the Yuminashi is of a high standard, everything fitted well, while the head was off I took the opertunity to polish the inlet & exhaust ports, may only give a whif of an extra horse, but I enjoyed doing it!
Paul

I only smooth inlets and but polish exhaust ports
Top
Pgill
New Member
New Member
Posts: 6
Joined: Mon Mar 31, 2014 11:35 am

Re: Yuminashi mods

Post by Pgill »

Hi
Yes am in the UK, Caerphilly, S Wales
Paul
Top
iceman
Forum Benefactor
Forum Benefactor
Posts: 2860
Joined: Sun Dec 29, 2013 11:43 pm
Year: 2014 125 (LED)
Color: White
Location: London, England

Re: Yuminashi mods

Post by iceman »

I'm impressed by the knowledge and mechanical skill of all those that attempt such things. So far I've checked the oil once :)
Image
Top
Pcxdemon
Frequent Poster
Frequent Poster
Posts: 932
Joined: Mon Feb 20, 2012 7:13 am
Location: Gold Coast,Australia

Re: Yuminashi mods

Post by Pcxdemon »

Pgill wrote:Hi
Back in Febuary, I converted my wife's Pcx to 164cc, using Yuninashi pieces from RZ Racing in Holland, after removing the engine, quite straight forward, I replaced the barrel, piston, cam, fuel injector, valve springs, and the variator, and a K&N filter, I stopped short of replacing the throttle body and exhaust.
What a marked difference, managed an indicated 80 mph rock steady!
Now have to run with the idle switch off, as the new cam does not have the decompression cam on it, it does not start instantly,
Spent about £550, well worth it!!! :D
Paul.
How is this still going?
Top
Post Reply

Return to “PCX Performance”