http://www.ebay.com/itm/DYNO-BOOST-PERF ... 0571569202
Does anyone has tried this?
Dyno boost performance chip
Moderator: Modsquad
Dyno boost performance chip
PCX170 2013
-
iceman
- Forum Benefactor
- Posts: 2860
- Joined: Sun Dec 29, 2013 11:43 pm
- Year: 2014 125 (LED)
- Color: White
- Location: London, England
Re: Dyno boost performance chip
Performance may be improved in terms of acceleration and top speed, but the info says it tricks the ECU by pumping in more fuel - greater acceleration, etc, but also states greater fuel economy in the same paragraph - can't all be true.
-
Urbanfreestyle
- Regular User
- Posts: 398
- Joined: Thu Jun 19, 2014 10:06 am
- Year: 2014 (UK)
- Color: Black
- Location: Exeter, Devon, UK
- Contact:
Re: Dyno boost performance chip
This is more than likely a variable resistor with a box and some wires for good measure. NO WAY would i pay that much for it! it goes along the same lines as electronic superchargers and magnets on your fuel lines.
Honda PCX 125 ESP (Black)
Power:11.7 hp @8500 rpm, Torque:12Nm @5000rpm
Mods: LED sidelights, Yoshimura Exhaust
Power:11.7 hp @8500 rpm, Torque:12Nm @5000rpm
Mods: LED sidelights, Yoshimura Exhaust
DEAD: 2013 Piaggio Typhoon 4 stroke 125cc (Black)
Power:9.65 HP @8500 rpm, Torque:8.2Nm @7500 rpm
Mods: Malossi Red foam filter, Hex LED Sidelights, Xenon headlights, USB charging port
Power:9.65 HP @8500 rpm, Torque:8.2Nm @7500 rpm
Mods: Malossi Red foam filter, Hex LED Sidelights, Xenon headlights, USB charging port
Re: Dyno boost performance chip
Strange thing is I don't see an IAT sensor in PCX...
Anyone knows?
In my car it's before the TBI but in PCX does not seem to have that sensor before the TBI.
Anyone knows?
In my car it's before the TBI but in PCX does not seem to have that sensor before the TBI.
-
sendler2112
- Forum Benefactor
- Posts: 1412
- Joined: Thu Jul 26, 2012 3:27 pm
- Year: 2013 PCX150
- Location: Syracuse, NY, USA 13045
Re: Dyno boost performance chip
The Honda fuel injection system for all of the sub 300cc bikes is very compact. Honda made a big deal out of this concept when it was proposed back in 2000. They looked around and still saw stinky carbureted bikes everywhere and wanted to bring fuel injection with a narrow band O2 sensor to the masses in Asia and India. The IntakeAirTemp, ThrottlePositionSensor, and ManifoldAbsolutePressure sensors are all surface mounted onto the main board at the throttle plate to make it as compact and inexpensive as possible.
.
I wouldn't buy that ebay thing. If you don't make a major mod you won't gain anything with even a good fuel controller like the Bazzaz. If you add displacement and change cams, you won't gain much without one.
.
http://www.bazzaz.net/index.php/honda/pcx150-12-15
.
http://www.bazzaz.net/index.php/fuel-co ... elf-mapper
.
.
I wouldn't buy that ebay thing. If you don't make a major mod you won't gain anything with even a good fuel controller like the Bazzaz. If you add displacement and change cams, you won't gain much without one.
.
http://www.bazzaz.net/index.php/honda/pcx150-12-15
.
http://www.bazzaz.net/index.php/fuel-co ... elf-mapper
.
