New Forza

wilbur · Post by **wilbur** » Tue Apr 14, 2015 7:12 pm

The Forza came home today! It is so nice to have some power. Can't wait to put some miles on!

wilbur · Post by **wilbur** » Tue Apr 14, 2015 7:29 pm

The only issue is that my flip-up helmet does not fit under the seat

tbln930 · Post by **tbln930** » Tue Apr 14, 2015 7:54 pm

Did you put the helmet in both locations according to the manual? I have a modular as well and some of them are pretty large. I just hit 2011 miles on my Forza I picked up in December 2014. Congratulations! They are smooth, reliable, and stable riding bikes. I wish my new Suzuki V-Strom had any of that on-board storage without the side cases.

fish · Post by **fish** » Tue Apr 14, 2015 8:55 pm

wilbur wrote:The Forza came home today! It is so nice to have some power. Can't wait to put some miles on!

Re. Helmets:
Yes it will if positioned correctly....2 of them will, actually.
Signed Fish wearing a XXXXL modular HJC helmet (not a missprint - 4X's!)

AustinPCX · Post by **AustinPCX** » Tue Apr 14, 2015 9:37 pm

My Size M modular helmet fits in either the front or back but won't fit in either location if positioned incorrectly.

wilbur · Post by **wilbur** » Tue Apr 14, 2015 11:01 pm

I'll have to keep trying then

wilbur · Post by **wilbur** » Tue Apr 14, 2015 11:05 pm

I will say it was wonderful riding home from the dealer. Only issues were the rear shocks feel like cement... Got to figure out the adjustment thing... I weigh 180lbs, hints on a starting point? And my jeans kept riding up in a bad place

.

tbln930 · Post by **tbln930** » Tue Apr 14, 2015 11:15 pm

Riding up in a bad place? Cleveland?

fish · Post by **fish** » Wed Apr 15, 2015 7:50 am

wilbur wrote:I will say it was wonderful riding home from the dealer. Only issues were the rear shocks feel like cement... Got to figure out the adjustment thing... I weigh 180lbs, hints on a starting point? And my jeans kept riding up in a bad place .

With some leather gloves, and the scoot on the center stand, grab the adjustment ring on the shock and turn to ease the load on the spring, to make the ride a little less stiff....being a scooter means it is not ever going to ride like a Buick..(see owner's manual for pix & instructions)
Baggy kevlar Slider brand jeans solve your other issue.
Fish

wilbur · Post by **wilbur** » Wed Apr 15, 2015 9:52 am

Playing a bit

SteveP · Post by **SteveP** » Wed Apr 15, 2015 10:16 am

wilbur wrote:Playing a bit

My HJC medium flip-front helmet fits in both spots, but "just". The owners manual shows how to position the helmets. At the rear location the helmet needs to face the right side of the scooter...and maybe turned slightly toward the front.

I weigh 140 and have the rear springs set on their lightest position...still rides to hard in my opinion. if you see a big bump coming, raise yourself slightly up off the seat...pulling on the handle bar and pushing with your feet...or move your feet back as far as you can and push upward. The ride is my only significant complaint with the Forza. Sharp bumps are the worst...like heaves in payment joints. There have been some discussions on the ride here, but don't think any solutions have been found.

speedandstyle · Post by **speedandstyle** » Wed Apr 15, 2015 3:43 pm

Looks nice - I am so envious! Obviously the color is why you bought it - come on admit it, you like red!

Mr Elbows · Post by **Mr Elbows** » Wed Apr 15, 2015 7:42 pm

I'm excited for you! I just barely got my PCX, but I'm Jonesing for a Forza so bad.

Really wanna trade mine in for a Forza. Seriously contemplating it. Have fun with your ƒorza!

wilbur · Post by **wilbur** » Wed Apr 15, 2015 7:47 pm

speedandstyle wrote:Looks nice - I am so envious! Obviously the color is why you bought it - come on admit it, you like red!

What gave me away? The Profile pic or the Forza pic?

wilbur · Post by **wilbur** » Wed Apr 15, 2015 7:50 pm

Can't get either shock adjuster to budge.

gn2 · Post by **gn2** » Thu Apr 16, 2015 3:20 am

Undo the shock lower mount bolt (one at a time) pull it back clear so you can get a grip of it, wrap it in a cloth and turn.

wilbur · Post by **wilbur** » Thu Apr 16, 2015 9:05 am

What's the torque number for putting it back on? And I did manage to squeeze my helmet (scorpion EXO ??? XL flip-up) under the seat, but it took some work.

gn2 · Post by **gn2** » Thu Apr 16, 2015 10:35 am

No idea I don't do torque wrenches.

SteveP · Post by **SteveP** » Thu Apr 16, 2015 11:48 am

wilbur wrote:What's the torque number for putting it back on? And I did manage to squeeze my helmet (scorpion EXO ??? XL flip-up) under the seat, but it took some work.

Torque is 29 ft.lbs. A large pair of channel-lock pliers should be all you need to turn the preload adjustment. Apply them to the approximately 2" diameter spring perch, not the part where the notches are.. You will likely need to remove only the lower shock bolt on the muffler side to get a good grip on that side spring perch...the left side is accessable without removing the bolt. NOTE: if the preload setting is at it's lowest setting, you can only turn the adjustment one way...up the notched ramp.

you you · Post by **you you** » Thu Apr 16, 2015 5:57 pm

gn2 wrote:No idea I don't do torque wrenches.

Cheers. But that doesn't mean the rest of the world doesn't absolutely realise their worth.

The Honda PCX / Forza / ADV150 / SH Forums

New Forza

New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza

Re: New Forza