Are the accessories for the PCX 125 and PCX 150 the same.

[joe-black]

I've ordered a red Honda PCX 150 which will be delivered within 3 weeks.
I want to order a Givi D322S Windshield and a Givi E370 top box (in combination with the Givi E231 rear plate) in advance.
These accessories are sold for PCX 125 ( 150 not yet mentioned).
Can anyone confirm if this is possible ?
Are there any differences for accessories for the PCX 125 and 150 ?

[Teamtd11]

You should not have any problems fitting the screen or the top box. The changes that I know of are the Engine, Seat and Fuel flap.

[maddiedog]

They should fit, the mounds are the same.

Welcome to the forums, and congrats on getting a PCX 150. How do you like it so far? We haven't seen many users with 150s yet.

[you you]

You should not have any problems fitting the screen or the top box. The changes that I know of are the Engine, Seat and Fuel flap.

Do you know what the differences are?

[maddiedog]

The fuel tank on the 150 is slightly smaller, so the fuel flap is different. The ECU, and most of the engine internals are slightly different (150ccs).

Most of this is speculation though, until a microfiche becomes widely available.

The chassis and body are identical, so windshields, topcases, etc are all interchangeable.

[you you]

The fuel tank on the 150 is slightly smaller, so the fuel flap is different. The ECU, and most of the engine internals are slightly different (150ccs).

Most of this is speculation though, until a microfiche becomes widely available.

The chassis and body are identical, so windshields, topcases, etc are all interchangeable.

I've got an ESP 125 and the airbox looks different to yours

[maddiedog]

Pics?

I was under the impression they were the same (though I have been wrong).

Here's the airbox on the stock 125:


Since the air filter is wedged between cover and airbox, if the box has a different shape at all, it will not fit:

[The_Head]

I hope they are the same airbox, because the K&N is one of the first things I want to do to my 150.

[you you]

I hope they are the same airbox, because the K&N is one of the first things I want to do to my 150.

Me too. Even if they are different externally there bound to use the same filter I guess

[gn2]

From pics on the interweb it looks like they are different shapes.

[scootsie]

I am thrilled to be a new owner of a 150; got it a couple of weeks ago near Philadelphia, PA. I want to add a windscreen. From what I read here, a windscreen (or windshield) that is designed for a 125 should fit. Any additional confirmation would be great.

[maddiedog]

From what we've heard from dealers, it should be the same.

What shields are you considering? Givi and Ermax both make several nice models...

[scootsie]

maddiedog,
Thanks for responding so fast. Not sure what shield I want to buy. The more I read these posts, the more confused I get. No one that I can see says that they really love what they bought. I am a cold weather rider; had my old scooter out at 14 degrees last winter. I need something that is really going to make a difference and I want hand protection. I like this following link, but I can't find anyone that has one. What do you think I should buy?
http://www.rideaddict.com/tcphondapcx12 ... ction.aspx

[you you]

I'll post some pics of the Airbox tomorrow if I can

[maddiedog]

Scootsie, that one looks nice, but about as tall as the standard Givi. I have the Givi tall windshield, I absolutely love it. It even keeps me mostly wet in the rain (as long as I keep moving).

Here's mine: http://hondapcx.org/viewtopic.php?f=3&t=19

Here is a good source for the Ermaxes: http://www.same-same.fr/ermax-m-1.html? ... lter_id=75 and pictures of the Ermax tall and short are both in this thread: http://hondapcx.org/viewtopic.php?f=2&t=210

[you you]

Here are the pictures. Bit hurried as I'm half way through preparing tea....








Only seven self tappers

[you you]

The filter is definitely different isn't it? There's a small primary air box at the front

[maddiedog]

Oh yeah, that's definitely different. Do not order the one for the 125. Good to know.

[Tristik]

maddiedog,
Thanks for responding so fast. Not sure what shield I want to buy. The more I read these posts, the more confused I get. No one that I can see says that they really love what they bought. I am a cold weather rider; had my old scooter out at 14 degrees last winter. I need something that is really going to make a difference and I want hand protection. I like this following link, but I can't find anyone that has one. What do you think I should buy?
http://www.rideaddict.com/tcphondapcx12 ... ction.aspx

~~
That's probably the best looking windshield I've seen yet! If I change mine from the default, that's definitely the one I'm gonna try to get.
~~

[Taz]

That is a nice screen but I still think the Ermax screens are cute too, even my +25cm version and they have the black trim surround and are well priced, see http://www.youtube.com/watch?v=Xt_VSsU0oVY