Honda Parts - where ?

easyrider · Post by **easyrider** » Tue Mar 08, 2016 7:17 am

Looking for recommendations/preferences on best place and cheapest to guy genuine Honda parts. Thx

zanggerk · Post by **zanggerk** » Tue Mar 08, 2016 7:22 am

Some parts you can get quite cheap from
powerbypcx.com
or
bikerzbits.com

j.d.b. · Post by **j.d.b.** » Tue Mar 08, 2016 7:33 am

If you are in the U.S. : http://www.partzilla.com/

gn2 · Post by **gn2** » Tue Mar 08, 2016 8:00 am

Best place to buy depends where you live and what part you want.

Recently I got a drivebelt delivered from Bikerzbits in Thailand for less than half the cost of the same part in the UK.

Big heavy parts tend to attract higher shipping costs so buying direct from Thailand may not always be cheaper.

WhiteNoise · Post by **WhiteNoise** » Tue Mar 08, 2016 10:48 am

C'mon easyrider!
Add your location to your profile so folks here can give you the correct answers/help.
Folks are guessing. Why?
Just follow the directions below my post, it takes no time at all and...
We Won't stop by uninvited

promise

MKE PCX · Post by **MKE PCX** » Tue Mar 08, 2016 11:40 am

http://www.procaliber.com/scooter-parts

Is the cheapest I've found for U.S delivery. I'm not sure if they do international or not.

Mel46 · Post by **Mel46** » Tue Mar 08, 2016 11:48 am

Yes, location please.
I have gotten a lot of parts from Bikebandit.com, and revzilla.com for clothing and accessories.

proteinsdef · Post by **proteinsdef** » Tue Mar 08, 2016 6:54 pm

http://www.bike-parts-honda.com/index.php

or A.J Sutton if in UK

iceman · Post by **iceman** » Tue Mar 08, 2016 9:32 pm

amazing how ripped off we are here - $5 for the air cleaner abroad, £14.50 here in the UK.

easyrider · Post by **easyrider** » Wed Mar 09, 2016 7:28 am

Thanks for all the comments.. I noticed in one case shipping was cheaper from Thailand to Florida (USA) than it was from I think Kansas.. I haven't checked them all but Thailand (biker bits etc) seems to do best in genuine Honda parts pricing. If you have the time to wait that is..I think a HONDA drive belt was like 28.00 shipped from Thailand and the best in US domestic parts was 35.00 shipped. Anyone use those Chinese knock off parts that fit GY6 engines? Curious how they perform on a Honda.

gn2 · Post by **gn2** » Wed Mar 09, 2016 7:43 am

The PCX engine isn't a GY6
Genuine Honda parts can usually be sourced at reasonable prices, consumable things like sparkplugs, brake pads/shoes, lightbulbs, drivebelts etc can be bought in advance so that you don't have to wait.

homie · Post by **homie** » Wed Mar 09, 2016 8:16 am

gn2 wrote:The PCX engine isn't a GY6

please elaborate GN, many parts including the oil screen, spring, 'O' ring are marketed under the GY6 150 engine description.
For example http://www.amazon.com/Scooter-Drain-Spr ... ain+screen

gn2 · Post by **gn2** » Wed Mar 09, 2016 8:36 am

The oil strainer cover was used on various old Hondas like the CB750 for example.
Doesn't make the PCX engine a sohc inline four.

MikeP · Post by **MikeP** » Sun Nov 26, 2017 7:15 pm

The time has come to replace my front disk brake. Here in Canada, my honda dealer wants 317.00 ca for the part! At Babbits online it is listed at 17.50 us. Exact same product and part numbers. Needless to say I ordered it from the states.
Sure have to check around on prices!!

iceman · Post by **iceman** » Mon Nov 27, 2017 6:03 am

MikeP wrote:The time has come to replace my front disk brake. Here in Canada, my honda dealer wants 317.00 ca for the part! At Babbits online it is listed at 17.50 us. Exact same product and part numbers. Needless to say I ordered it from the states. Sure have to check around on prices!!

I've fitted EBC pads, £12 delivered to UK addy from Ebay, or £20 over the counter at a Honda dealer (yes, they did not have Honda originals in stock but could order if wanted, otherwise exactly the same pads). Had a bit of grief fitting them due to recessing the three cylinders enough as they were stiff, but taking the little bar bracket off (presses into two rubber grommet things, and is a pull/press fit, allowed full access for cleaning and getting to bits).
They work fine - don't forget to press the lever a bit to get pressure back before riding

PCX150Rider · Post by **PCX150Rider** » Mon Nov 27, 2017 10:29 am

I've always had good luck ordering from BikeBandit.com.

dick the den · Post by **dick the den** » Sat Dec 02, 2017 8:24 am

My Headlamp blew on my Honda vision 110, Honda dealer wanted £20 for one, looked up on wemoto web-site £4,24p, so ordered one and other bits. When I changed it, couldn't tell which one was the bulb that blew. What a rip-off.

gn2 · Post by **gn2** » Sun Dec 03, 2017 9:37 am

£6.49 and usually in stock at Halfords http://www.halfords.com/motoring/motorc ... 12v-35-35w

RPM68 · Post by **RPM68** » Sun Dec 03, 2017 2:35 pm

I've had good luck with cheapcycleparts.com. The items I have received shipped from the midwest, which is good for me. Parts have come in genuine Honda packaging. Does anyone else have any experience with them god or bad?

Bob

MikeP · Post by **MikeP** » Tue Dec 05, 2017 12:25 am

Just recieved my parts order from Babbitsonline and quite pleased.
1 front disk
2 drive belts
4 front disk bolts
1 air filter
1 spark plug
Cost 130.00 canadian
My local dealer is over 500.00
For the same parts!

The Honda PCX / Forza / ADV150 / SH Forums

Honda Parts - where ?

Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?

Re: Honda Parts - where ?