PCX 150 Accesories using PCX 125
Moderator: Modsquad
PCX 150 Accesories using PCX 125
Has any one in the US used any Givi PCX 125 accessories on their PCX 150? I know some overseas have done w/o any problems but I didnt know if the US model is the same as the Europe PCX 150. Thank for any help!
-
maddiedog
- Benevolent Overlord
- Posts: 3646
- Joined: Tue Nov 01, 2011 7:04 pm
- Year: 2011
- Color: White
- Location: New Mexico
- Contact:
Re: PCX 150 Accesories using PCX 125
The US and UK models are the same accessory-wise. The Givi windshields, topcases, topcase mounts, and tunnel bags are all compatible with both the PCX 125 and 150. 
Currently ride: Nothing right now - mostly mountain biking with my boys until they're old enough to ride 
Previously rides: 2011 Honda PCX 125, 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Previously rides: 2011 Honda PCX 125, 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Re: PCX 150 Accesories using PCX 125
Do you feel they are easy enough to install? Just nervous about drilling into my PCX 150!
Kyle
Kyle
Re: PCX 150 Accesories using PCX 125
If you mean drilling to install a rack/topbox mount, its easy. The 4 holes are marked on the molding underneath the rear fairing. Its soft plastic so is quick to drill. I used an undersized drill bit for large pilot holes then my dremel tool to bore out the holes to the correct size and location. Its a 10 min job.
Re: PCX 150 Accesories using PCX 125
Good idea using the dremel! Less risk of cracking Id imagine! What tip did you use?
Re: PCX 150 Accesories using PCX 125
Its only soft plastic to dremel. I used the tapered file. Mine is pretty worn out but fine for plastic. Dont run the speed too high as otherwise the plastic goes black from the heat (OK if your PCX is black though!)