Red/black 2-tone Forza

Brimma · Post by **Brimma** » Fri Jun 26, 2015 11:25 am

Just happened by a Thai website selling genuine Honda body parts at very good prices (approx a third of the UK dealer price), so even with the additional import costs they still came out very, very reasonable

I've seen red Forzas abroad, unfortunately not available in the UK, and thought a black and red scheme could look quite good

Anyway, you can decide from the pics below, but I'm pretty happy with it

Jge64 · Post by **Jge64** » Fri Jun 26, 2015 11:36 am

Very nice....

Vesper2112 · Post by **Vesper2112** » Fri Jun 26, 2015 1:12 pm

What site is that, btw?

Brimma · Post by **Brimma** » Fri Jun 26, 2015 2:09 pm

http://powerbyforza.wifeo.com/boutique- ... _2013.html

Mister Paul · Post by **Mister Paul** » Fri Jun 26, 2015 3:31 pm

Now you got me thinking what could go well with white....

Jge64 · Post by **Jge64** » Fri Jun 26, 2015 3:34 pm

Mister Paul wrote:Now you got me thinking what could go well with white....

Me too....I think the black around the shield and maybe lower pieces.....

Mister Paul · Post by **Mister Paul** » Fri Jun 26, 2015 3:53 pm

Maybe we should set up a panel swap thread....

you you · Post by **you you** » Fri Jun 26, 2015 5:47 pm

Looks good tbh. How much did it cost?

wilbur · Post by **wilbur** » Fri Jun 26, 2015 7:26 pm

I definitely like the concept. But most of the plastics are cheap enough that we could play with paint colors too.

Brimma · Post by **Brimma** » Fri Jun 26, 2015 7:38 pm

you you wrote:Looks good tbh. How much did it cost?

About £150 plus £23 for tax and admin charges

The same parts from a UK dealer would have been about £450

Brimma · Post by **Brimma** » Wed Apr 27, 2016 5:55 pm

A few developments for the Forza

WirusWin seat with matching red piping

Swapped the front mudguard out for a red one

Then decided that the Honda badging was a little too discreet, so added a modest decal to make it a bit more obvious

davenowherejones · Post by **davenowherejones** » Wed Apr 27, 2016 9:51 pm

So where did you get the decal? Where did you get the panels? Mine are broken and repaired wrong.

WhiteNoise · Post by **WhiteNoise** » Wed Apr 27, 2016 11:09 pm

Bold. Sexy. Unique. Love It!
Finally! someone on our forums has two toned the Tupperware...and Damn it looks Awesome!!!
Thrilled you shared this with us. Thanx

Brimma · Post by **Brimma** » Thu Apr 28, 2016 2:36 am

WhiteNoise wrote:Bold. Sexy. Unique. Love It!
Finally! someone on our forums has two toned the Tupperware...and Damn it looks Awesome!!!
Thrilled you shared this with us. Thanx

Thank you for your enthusiasm, it makes it all worthwhile

PingGam · Post by **PingGam** » Thu Apr 28, 2016 2:43 am

Does the seat allow you to sit much further back than the original?

Sent from my m2 note using Tapatalk

Brimma · Post by **Brimma** » Thu Apr 28, 2016 2:49 am

PingGam wrote:Does the seat allow you to sit much further back than the original?

It certainly seems to make a difference

Haven't had the chance to have a long run out to comment on comfort yet, but will report back when I do

gn2 · Post by **gn2** » Thu Apr 28, 2016 5:00 am

The Honda sticker spoils it for me, you would have been better with one of the circular raised Honda wing badges as fitted to the higher end bikes.

Brimma · Post by **Brimma** » Thu Apr 28, 2016 7:42 am

gn2 wrote:The Honda sticker spoils it for me, you would have been better with one of the circular raised Honda wing badges as fitted to the higher end bikes.

What's that saying?

You can please some of the people all the time, and you can please all of the people some of the time, but you'll never please all of the people all of the time

fish · Post by **fish** » Thu Apr 28, 2016 8:41 am

Brimma wrote:
gn2 wrote:The Honda sticker spoils it for me, you would have been better with one of the circular raised Honda wing badges as fitted to the higher end bikes.
What's that saying?

You can please some of the people all the time, and you can please all of the people some of the time, but you'll never please all of the people all of the time

No, seriously....nice job ....but do not quit playing with the stickers.
He's right....that deep burgundy round Honda badge fitted on the higher end bikes would look better in place of the big HONDA sticker. More understated and classy.
OR, or,...move the HONDA logo down to the race bike area below the feet, and try a couple different color Honda WING emblems up there in it's place....silver, white, red ??
. Cheap enough to try different colors and sizes in both areas!.
Keep trying things.....
Thin red reflective rim tape w/FOZA 300 logo on it, in black lettering on wheels.
The generic & agricultural can-looking muffler undoes it for me, otherwise.
Thanks for sharing.
Fish

fish · Post by **fish** » Thu Apr 28, 2016 8:55 am

Black and dark/silver grey.
Grey and dark tan....
White and pale grey...
Colors closer to each other.
Look less rattle cannish.
Fish

The Honda PCX / Forza / ADV150 / SH Forums

Red/black 2-tone Forza

Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza

Re: Red/black 2-tone Forza