Spot the difference - it's not the clock
Moderator: Modsquad
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Spot the difference - it's not the clock
Toasty warm
Re: Spot the difference - it's not the clock
Interesting. Congrats for your, from now on, warm hands.
Where's the how-to, BTW?. Didn't feel like doing one? .
Where's the how-to, BTW?. Didn't feel like doing one? .
Re: Spot the difference - it's not the clock
Would have been good if the control model could have been mounted in the front glove box out of sight. It is a bit in your face there.
Re: Spot the difference - it's not the clock
Nice, where did you pick those up?
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Spot the difference - it's not the clock
Cascanciu wrote:Interesting. Congrats for your, from now on, warm hands.
Where's the how-to, BTW?. Didn't feel like doing one? .
The how to us in the instructions that come with it
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Spot the difference - it's not the clock
Not for me. Out of sight would mean I couldn't adjust the heat on the flyTC3 wrote:Would have been good if the control model could have been mounted in the front glove box out of sight. It is a bit in your face there.
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Spot the difference - it's not the clock
C-Note wrote:Nice, where did you pick those up?
eBay. I can give you the seller if you want but they're uk based
Re: Spot the difference - it's not the clock
Fair enough. Then we'll be happy if you scan the instructions and post them in here .qed wrote:Cascanciu wrote:Interesting. Congrats for your, from now on, warm hands.
Where's the how-to, BTW?. Didn't feel like doing one? .
The how to us in the instructions that come with it
Re: Spot the difference - it's not the clock
Looks interesting, would like to hear how effective they are and the temps you use them. Another thing, does the alternator produce enough power or do they pull from the battery?
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Spot the difference - it's not the clock
Copyright It doesn't need a how to does it. There are only two connectors. A positive and a negative.Cascanciu wrote:Fair enough. Then we'll be happy if you scan the instructions and post them in here .qed wrote:Cascanciu wrote:Interesting. Congrats for your, from now on, warm hands.
Where's the how-to, BTW?. Didn't feel like doing one? .
The how to us in the instructions that come with it
I can't believe you are interested in heated grips either
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Spot the difference - it's not the clock
super_g wrote:Looks interesting, would like to hear how effective they are and the temps you use them. Another thing, does the alternator produce enough power or do they pull from the battery?
They connect to the battery (which is fed by the generator)
They only take 3.6 amps on the maximum setting. Max is flipping hot so I doubt it would be used for long, if ever
- haildamage
- Regular User
- Posts: 246
- Joined: Sat Nov 05, 2011 10:01 am
- Location: Kyoto/Osaka
Re: Spot the difference - it's not the clock
the peak alternator output is 309 watts, which is pretty good for a 125cc. how many watts does do the grips draw?
when i was first running my heated jacket i put a voltmeter on so i could watch how it was doing. my understanding is that if it drops below 12.8, you are overtaxing the charging system which is not good for it.
in my experience, there was not enough output at idle but plenty just a bit above idle. therefore, i turn my heated jacket off at stoplights. my honda heated grips turn themselves on and off when idle stop engages or when it is idling and there isnt enough output for the system.
check out my thread on the heated jacket here:
http://www.hondapcx.org/viewtopic.php?f=2&t=248
when i was first running my heated jacket i put a voltmeter on so i could watch how it was doing. my understanding is that if it drops below 12.8, you are overtaxing the charging system which is not good for it.
in my experience, there was not enough output at idle but plenty just a bit above idle. therefore, i turn my heated jacket off at stoplights. my honda heated grips turn themselves on and off when idle stop engages or when it is idling and there isnt enough output for the system.
check out my thread on the heated jacket here:
http://www.hondapcx.org/viewtopic.php?f=2&t=248
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Spot the difference - it's not the clock
I'm going to have to read the instructions now aren't I
Re: Spot the difference - it's not the clock
The generic instructions from Oxford won't tell you to use the dedicated heated grips accessory socket in the PCX wiring loom which will take care of switching them off and on as required
Four decades on two wheels has taught me nothing, all advice given is guaranteed to be wrong
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Spot the difference - it's not the clock
28 to 30 watts
I've got them wired so that they cut out at idle too
On my other bikes I'm used to switching them off a mile or so before the end of the journey just to let things top up. If you know what I mean
I've got them wired so that they cut out at idle too
On my other bikes I'm used to switching them off a mile or so before the end of the journey just to let things top up. If you know what I mean
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Spot the difference - it's not the clock
gn2 wrote:The generic instructions from Oxford won't tell you to use the dedicated heated grips accessory socket in the PCX wiring loom which will take care of switching them off and on as required
Ohh. Where is that?
The grips also switch off if the voltage drops below 11.5v apparently
Re: Spot the difference - it's not the clock
I think it's somewhere in behind the ignition.
I'm fairly sure that one exists, I remember reading a thread regarding fitment of the Honda version either on here or the other place.
I'm fairly sure that one exists, I remember reading a thread regarding fitment of the Honda version either on here or the other place.
Four decades on two wheels has taught me nothing, all advice given is guaranteed to be wrong
-
- Regular User
- Posts: 313
- Joined: Fri Nov 11, 2011 3:55 pm
- Location: Province of Almeria, Spain, for now.
- Contact:
Re: Spot the difference - it's not the clock
I've got hot grips fitted. The switch (just a small round one - off, low heat and high heat), was placed through the plastic near the instruments above the ignition switch as gn2 says.
Re: Spot the difference - it's not the clock
How easy are these to fit really?
The most I have modified my bike is adding a clock with an alan key and sinlge screw.
Is this a job for me? (I'm not a complete idiot)
but those wintery nights are arriving and this seems useful!
are these them?
http://www.amazon.co.uk/Oxford-of693-Ho ... sbs_auto_5
The most I have modified my bike is adding a clock with an alan key and sinlge screw.
Is this a job for me? (I'm not a complete idiot)
but those wintery nights are arriving and this seems useful!
are these them?
http://www.amazon.co.uk/Oxford-of693-Ho ... sbs_auto_5
Last edited by PeteCX125 on Tue Sep 25, 2012 4:01 am, edited 1 time in total.
Re: Spot the difference - it's not the clock
A decent pair of gloves and/or bar muffs won't flatten your battery...
Four decades on two wheels has taught me nothing, all advice given is guaranteed to be wrong