When turn on ignition switch, not all PGM-FI indicator not o
Moderator: Modsquad
-
- New Member
- Posts: 6
- Joined: Thu Nov 03, 2016 12:33 pm
- Year: 2013
- Color: Black
- Location: El Dorado, Arkansas, USA
When turn on ignition switch, not all PGM-FI indicator not o
Normally when turn on ignition switch, all light indicator should on few seconds, but today I only see the fuel gauge and speedometer on, the PGM-FI usually on then off, but not today, and when I started engine, nothing happen. I checked fuses, battery, engine switch, side stand, etc, nothing wrong, it just like no power get into starter and don't hear any sound. Do you have any idea? Thanks.
- Mel46
- Forum Benefactor
- Posts: 6964
- Joined: Tue Nov 13, 2012 5:13 pm
- Year: 2013
- Color: red PCX
- Location: Dallas, Ga USA
Re: When turn on ignition switch, not all PGM-FI indicator n
Sounds like your battery has too weak to do its job. See if you can get it jump started. If so, then time to replace the battery.
Currently own:
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
-
- New Member
- Posts: 6
- Joined: Thu Nov 03, 2016 12:33 pm
- Year: 2013
- Color: Black
- Location: El Dorado, Arkansas, USA
Re: When turn on ignition switch, not all PGM-FI indicator n
I replaced the battery last couple months, I also have have the battery charger, recharge full, but nothing happen. Like I said, starter not start at all.
-
- Frequent Poster
- Posts: 1830
- Joined: Wed Jun 10, 2015 4:30 pm
- Year: 18 300 xmax
- Color: White
- Location: Fort lauderdale
- Contact:
Re: When turn on ignition switch, not all PGM-FI indicator n
Kill switch on?
Glen
‘15 PCX build thread here:
https://www.hondapcx.org/viewtopic.php?f=2&t=4640
Current: ‘18 XMAX 300 & ‘22 NAVI
‘15 PCX build thread here:
https://www.hondapcx.org/viewtopic.php?f=2&t=4640
Current: ‘18 XMAX 300 & ‘22 NAVI
- relic
- Forum Benefactor
- Posts: 516
- Joined: Mon Aug 25, 2014 8:24 pm
- Year: 2013
- Color: red white
- Location: BC Canada
Re: When turn on ignition switch, not all PGM-FI indicator n
Kill switch on?
my first thought.
my first thought.
-
- New Member
- Posts: 6
- Joined: Thu Nov 03, 2016 12:33 pm
- Year: 2013
- Color: Black
- Location: El Dorado, Arkansas, USA
Re: When turn on ignition switch, not all PGM-FI indicator n
Yes, I did turn it on off to make sure, side stand up, and hold brakes when starting...
- relic
- Forum Benefactor
- Posts: 516
- Joined: Mon Aug 25, 2014 8:24 pm
- Year: 2013
- Color: red white
- Location: BC Canada
Re: When turn on ignition switch, not all PGM-FI indicator n
I see you posted that this all started when you took the case off to change your belt
kind of points to your side stand switch but you say that checks out?
I'm stumped.
kind of points to your side stand switch but you say that checks out?
I'm stumped.
- kramnala58
- Mod Emeritus
- Posts: 2864
- Joined: Sun Jun 09, 2013 7:49 am
- Color: White is faster
- Location: Niagara Falls, USA
Re: When turn on ignition switch, not all PGM-FI indicator n
Dylant66 ... I am not sure where the post is that Relic is referring to, that you took the case off to change the belt, but that would be something I would check into.relic wrote:I see you posted that this all started when you took the case off to change your belt
kind of points to your side stand switch but you say that checks out?I'm stumped.
I can't recall where, but there is a topic somewhere on the forums regarding disabling the side stand switch. I think it was earlier this year, but may have been longer ago than that. If you can find it, it may be of help.
2010 Honda PCX 125 in Thailand (White) - "White Lightning" Sold in Sept 2017
2009 Yamaha Majesty YP400 in USA (Metalic Titanium) - "The Throne" Sold in June 2020

2009 Yamaha Majesty YP400 in USA (Metalic Titanium) - "The Throne" Sold in June 2020

- WhiteNoise
- Official Moderator
- Posts: 8784
- Joined: Mon Nov 07, 2011 11:15 pm
- Year: 2015 PCX 150esp
- Color: Pearl *White*
- Location: L.I. N.Y.
Re: When turn on ignition switch, not all PGM-FI indicator n
Welcome to our forums
Could you be remembering one of these threads?
http://www.hondapcx.org/viewtopic.php?f ... and+switch
Or
http://www.hondapcx.org/viewtopic.php?f ... and+switch
Or
http://www.hondapcx.org/viewtopic.php?f ... and+switch
I hope your resolve lies within one of them. "Search" is your friend,....Our friend

http://www.hondapcx.org/viewtopic.php?f ... and+switch
Or
http://www.hondapcx.org/viewtopic.php?f ... and+switch
Or
http://www.hondapcx.org/viewtopic.php?f ... and+switch
I hope your resolve lies within one of them. "Search" is your friend,....Our friend

Location, Year & Color - Please enter Yours today!
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
- kramnala58
- Mod Emeritus
- Posts: 2864
- Joined: Sun Jun 09, 2013 7:49 am
- Color: White is faster
- Location: Niagara Falls, USA
Re: When turn on ignition switch, not all PGM-FI indicator n
You are a rock star WN. If it can be found, you will typically find it.
2010 Honda PCX 125 in Thailand (White) - "White Lightning" Sold in Sept 2017
2009 Yamaha Majesty YP400 in USA (Metalic Titanium) - "The Throne" Sold in June 2020

2009 Yamaha Majesty YP400 in USA (Metalic Titanium) - "The Throne" Sold in June 2020
