In case anyone is interested..
Here is one of the threads about the seat offered by powerbypcx.
http://www.hondapcx.org/viewtopic.php?f=7&t=1401
I've had mine for a few months before I even realized that I was supposed to swap over the little weather strip that seals the seat pan to the lip of the scoot:
Anyway, thankfully I still had my seat, so I went and the old seal just peeled off very easily. Maybe the cold weather helped, but all the stickiness stayed with the rubber. I tried just pressing it into place, but it wasn't sticky enough, so on with the real glue.
First, the seat must be removed, but since you are swapping seats anyway, no big deal, right?
My first issue was that the new seat material was cut a bit long and was in the way of a clean install:
I didn't want to cut it, so I just temporarily taped it back out of the way:
The next area of business is what glue to use.
I have very good luck with this yellow contact type weather strip adhesive. This is Permatex brand, but 3M makes it and many others.
I don't like the black version even though it doesn't show up if you get a bit sloppy.
The main thing is to follow directions and let it get tacky before pressing anything together.
Normally, it would be applied to both parts, but since the strip was already sticky, I just put it in the channel sparingly using a q tip:
Once it starts getting sticky and not slimy anymore, start at one and work your way around.
I used 2 different tools to press it into the channel:
If everything goes right, you end up where you started:
How-To: Reinstall Weatherstripping On A New Seat
Moderator: Modsquad
- chucktuna
- I'm up to 12 or 13 now...
- Posts: 207
- Joined: Sat Aug 03, 2013 5:06 pm
- Year: 2013
- Color: Black
- Location: So ILL
How-To: Reinstall Weatherstripping On A New Seat
Too many scoots..... 12 or so I think .
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: How to swap the weatherstip on your seat if you upgrade.
I think that is a contact adhesive. If it is it's best applied to both surfaces, left for a while and pressed into contact.
- WhiteNoise
- Official Moderator
- Posts: 8784
- Joined: Mon Nov 07, 2011 11:15 pm
- Year: 2015 PCX 150esp
- Color: Pearl *White*
- Location: L.I. N.Y.
Re: How to swap the weatherstip on your seat if you upgrade.
Hmmm....other choice: http://www.loctiteproducts.com/ I like their products. Put cursor over each item for info
Location, Year & Color - Please enter Yours today!
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
- chucktuna
- I'm up to 12 or 13 now...
- Posts: 207
- Joined: Sat Aug 03, 2013 5:06 pm
- Year: 2013
- Color: Black
- Location: So ILL
Re: How to swap the weatherstip on your seat if you upgrade.
Yes, I mentioned it is a "contact type" adhesive, and that it needs to get tacky before contact.
Loctite makes some good stuff too!
Loctite makes some good stuff too!
Too many scoots..... 12 or so I think .
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: How to swap the weatherstip on your seat if you upgrade.
chucktuna wrote:Yes, I mentioned it is a "contact type" adhesive, and that it needs to get tacky before contact.
Loctite makes some good stuff too!
It needs spreading on both surfaces was the point I think I was getting at
- chucktuna
- I'm up to 12 or 13 now...
- Posts: 207
- Joined: Sat Aug 03, 2013 5:06 pm
- Year: 2013
- Color: Black
- Location: So ILL
Re: How to swap the weatherstip on your seat if you upgrade.
you you wrote:chucktuna wrote:Yes, I mentioned it is a "contact type" adhesive, and that it needs to get tacky before contact.
Loctite makes some good stuff too!
It needs spreading on both surfaces was the point I think I was getting at
Yes, agreed again.
Normally, it would be applied to both parts, but since the strip was already sticky, I just put it in the channel sparingly using a q tip:
Too many scoots..... 12 or so I think .