I remove one clip on upper side and one screw at the rear ... but nothing move
I know how to remove the spark plugs panel but not sure it helps.
A thai shop told me i only need 10 minutes to install the set
Removing body panels
Moderator: Modsquad
Removing body panels
I need help to install the new shocks.
I remove one clip on upper side and one screw at the rear ... but nothing move
I know how to remove the spark plugs panel but not sure it helps.
A thai shop told me i only need 10 minutes to install the set
I remove one clip on upper side and one screw at the rear ... but nothing move
I know how to remove the spark plugs panel but not sure it helps.
A thai shop told me i only need 10 minutes to install the set
-
Urbanfreestyle
- Regular User
- Posts: 398
- Joined: Thu Jun 19, 2014 10:06 am
- Year: 2014 (UK)
- Color: Black
- Location: Exeter, Devon, UK
- Contact:
Re: Removing body panels
I think you have to remove the whole seat bucket to get access to the top of the rear shocks.
Honda PCX 125 ESP (Black)
Power:11.7 hp @8500 rpm, Torque:12Nm @5000rpm
Mods: LED sidelights, Yoshimura Exhaust
Power:11.7 hp @8500 rpm, Torque:12Nm @5000rpm
Mods: LED sidelights, Yoshimura Exhaust
DEAD: 2013 Piaggio Typhoon 4 stroke 125cc (Black)
Power:9.65 HP @8500 rpm, Torque:8.2Nm @7500 rpm
Mods: Malossi Red foam filter, Hex LED Sidelights, Xenon headlights, USB charging port
Power:9.65 HP @8500 rpm, Torque:8.2Nm @7500 rpm
Mods: Malossi Red foam filter, Hex LED Sidelights, Xenon headlights, USB charging port
-
Urbanfreestyle
- Regular User
- Posts: 398
- Joined: Thu Jun 19, 2014 10:06 am
- Year: 2014 (UK)
- Color: Black
- Location: Exeter, Devon, UK
- Contact:
Re: Removing body panels
Honda PCX 125 ESP (Black)
Power:11.7 hp @8500 rpm, Torque:12Nm @5000rpm
Mods: LED sidelights, Yoshimura Exhaust
Power:11.7 hp @8500 rpm, Torque:12Nm @5000rpm
Mods: LED sidelights, Yoshimura Exhaust
DEAD: 2013 Piaggio Typhoon 4 stroke 125cc (Black)
Power:9.65 HP @8500 rpm, Torque:8.2Nm @7500 rpm
Mods: Malossi Red foam filter, Hex LED Sidelights, Xenon headlights, USB charging port
Power:9.65 HP @8500 rpm, Torque:8.2Nm @7500 rpm
Mods: Malossi Red foam filter, Hex LED Sidelights, Xenon headlights, USB charging port
Re: Removing body panels
Here we are in Forza section, u sure ?Urbanfreestyle wrote:http://www.hondapcx.org/viewtopic.php?t=2473
-
Urbanfreestyle
- Regular User
- Posts: 398
- Joined: Thu Jun 19, 2014 10:06 am
- Year: 2014 (UK)
- Color: Black
- Location: Exeter, Devon, UK
- Contact:
Re: Removing body panels
I'm not 100% but i would assume it to be a similar lay out... perhaps better waiting for someone with a forza to help out. Have you tried google?
Honda PCX 125 ESP (Black)
Power:11.7 hp @8500 rpm, Torque:12Nm @5000rpm
Mods: LED sidelights, Yoshimura Exhaust
Power:11.7 hp @8500 rpm, Torque:12Nm @5000rpm
Mods: LED sidelights, Yoshimura Exhaust
DEAD: 2013 Piaggio Typhoon 4 stroke 125cc (Black)
Power:9.65 HP @8500 rpm, Torque:8.2Nm @7500 rpm
Mods: Malossi Red foam filter, Hex LED Sidelights, Xenon headlights, USB charging port
Power:9.65 HP @8500 rpm, Torque:8.2Nm @7500 rpm
Mods: Malossi Red foam filter, Hex LED Sidelights, Xenon headlights, USB charging port
Re: Removing body panels
Here you go : http://www.youtube.com/watch?v=MZRL7EyF1aU
Very nice channel, by the way.
It is strange and interesting, why do the change the chassis sometimes? Are there any issues with the pcx frames?
Very nice channel, by the way.
It is strange and interesting, why do the change the chassis sometimes? Are there any issues with the pcx frames?
Re: Removing body panels
The forza community is not growing a lot apart from Thailand, but hard to get infos from the forzaclub.Urbanfreestyle wrote:I'm not 100% but i would assume it to be a similar lay out... perhaps better waiting for someone with a forza to help out. Have you tried google?