How to fit on SPY 5000m alarm system

[amastershock]

Hi there everyone, I think I looked everywhere without any luck for a guide to how to install a spy 5000 alarm system on a Honda PCX. So I thought I will ask if anyone knows a good guide how to fit this alarm system. I will be really, really grateful!

Everywhere I look I see people playing around with the remote but not actually showing how the installed it in a Honda PCX, it gets frustrating when you go on YouTube and all you see is that lol.

Please can you post images of your alarm system that you installed, where you installed it and how you open it up and looked for the wires.

Thank you guys. I really appreciate your help in advance. Thank you again!

[WhiteNoise]

Welcome to our forum(s)
Sorry I'm not familiar with that alarm system but hold fast perhaps other members are. In the meantime....

Would you do us all a favor please? You can by adding your location to your profile. I have simple instructions below my post to get that done. Cheers!

[Mel46]

I couldn't find anything on installing it on a pcx. However, I did find something on installing it on a Honda motorcycle. Maybe this will give you some hints.
http://www.instructables.com/id/Install ... alarm-int/

[Cube]

Found a thread on a Spyder forum discussing these, has a link to the alarm owner's manual with wiring diagrams
http://www.spyderlovers.com/forums/show ... -How-Too-s

[amastershock]

Hi guys, thank you for the great response and the links.

I understand the the other links are for different motorcycles, they had different configurations and wire types configuration. if it's possible if anyone can guide me on the Honda PCX configuration for example, where to install them, at the front where the windshield is or underneath the seat ETC.

It doesn't have to be this particular alarm system on a Honda PCX, I believe most of the alarm system have the same type of wiring far as I seen in different type of blogs and YouTube videos. if someone has an alarm system on their PCX can post some images of the way they attached and assembled the alarm system on their PCX that be much appreciated.


This is what I bought the link is: https://www.ebay.co.uk/itm/SPY-MOTORBIK ... 2749.l2649


This is the alarm system that I received.

WP_20180420_01_14_24_Pro.jpg (316.87 KiB) Viewed 7046 times

WP_20180420_01_12_31_Pro.jpg (272.57 KiB) Viewed 7046 times

These are the 9 wires that needs to be connected.

WP_20180420_01_13_39_Pro.jpg (245.86 KiB) Viewed 7046 times

This is the manual that I received with the product.

IMG_0001.jpg (177.86 KiB) Viewed 7046 times

IMG_0002.jpg (261.01 KiB) Viewed 7046 times

IMG_0003.jpg (289.9 KiB) Viewed 7046 times

IMG_0005.jpg (276.16 KiB) Viewed 7046 times

IMG_0006.jpg (245.76 KiB) Viewed 7046 times

IMG_0007.jpg (341.4 KiB) Viewed 7046 times

IMG_0008.jpg (343.36 KiB) Viewed 7046 times

IMG_0009.jpg (361.69 KiB) Viewed 7046 times

IMG_0010.jpg (343.65 KiB) Viewed 7046 times

IMG_0011.jpg (263.47 KiB) Viewed 7046 times

IMG_0012.jpg (203.24 KiB) Viewed 7046 times

IMG_0013.jpg (226.22 KiB) Viewed 7046 times

This is a Honda PCX wiring diagram that I found on another post on this website: http://www.hondapcx.org/viewtopic.php?f=15&t=771

Honda PCX150 Wiring Diagram.jpg (320.23 KiB) Viewed 7046 times

Thank you for contributing in advance and helping me out. Thanks again.




[/size]

[Cube]

That looks like the same vendor I googled earlier, they claim that they have bike specific diagrams and tech help... I'd take advantage of that and ask them for whatever they have.

[amastershock]

Thanks good idea, I'll try to get in contact with the vendor and see if I could get some specific diagram or something that will be helpful. I'll keep you guys posted. Thanks

[Wazzycabbage]

I got same alarm system as yourself, just branded as hawk X90 only part I did not wire in was the remote start.
This was made easy by the manufacturer giving specific wire colours to match wiring loom to specific ,i.e honda pcx

[masator]

If someone has installed the alarm, can you confirm if drilling the plastic in order to reach the battery is necessary?

[you you]

If someone has installed the alarm, can you confirm if drilling the plastic in order to reach the battery is necessary?

Don't drill down to it. It has a little hatch.

[Tommyaweej]

Hi guys, thank you for the great response and the links.

I understand the the other links are for different motorcycles, they had different configurations and wire types configuration. if it's possible if anyone can guide me on the Honda PCX configuration for example, where to install them, at the front where the windshield is or underneath the seat ETC.

It doesn't have to be this particular alarm system on a Honda PCX, I believe most of the alarm system have the same type of wiring far as I seen in different type of blogs and YouTube videos. if someone has an alarm system on their PCX can post some images of the way they attached and assembled the alarm system on their PCX that be much appreciated.


This is what I bought the link is: https://www.ebay.co.uk/itm/SPY-MOTORBIK ... 2749.l2649


This is the alarm system that I received.

WP_20180420_01_14_24_Pro.jpg

WP_20180420_01_12_31_Pro.jpg

These are the 9 wires that needs to be connected.

WP_20180420_01_13_39_Pro.jpg

This is the manual that I received with the product.

IMG_0001.jpg

IMG_0002.jpg

IMG_0003.jpg

IMG_0005.jpg

IMG_0006.jpg

IMG_0007.jpg

IMG_0008.jpg

IMG_0009.jpg

IMG_0010.jpg

IMG_0011.jpg

IMG_0012.jpg

IMG_0013.jpg

This is a Honda PCX wiring diagram that I found on another post on this website: http://www.hondapcx.org/viewtopic.php?f=15&t=771

Honda PCX150 Wiring Diagram.jpg

Thank you for contributing in advance and helping me out. Thanks again.




[/size]

Did you manage to get the wiring diagram?