how many mm for the mirrors screws?

[kenedly]

My left mirrors is broken,how many mm for the mirror screws?I want to buy the cnc mirrors the change but i dont know how many mm for the screw,and which mirror screw is clockwise,which is counter-clockwise,thx all fds a lot ^V^

[Jge64]

M10 x 1.25

[kenedly]

which mirror screw is clockwise,which is counter-clockwise？ my mirror is lost now so i can,t test

[honkerman]

Any mirror designed for the PCX should have the proper threading; And I would happily check on my own for you, but with a broken collarbone I'm afraid I can't break my own mirrors loose to check.

Suggest you buy a shop manual with all the specifics you've been looking for. It might prove worthwhile.

[kenedly]

anybody know>﹏<because in hong kong a few motorcycles shop,and i ask there is no mirror only for pcx mirror,just tell then how many mm and which direction for the screw,thx for your answer,hope you will soon recover my friend

[kenedly]

anybody can help me>﹏<

[you you]

My left mirrors is broken,how many mm for the mirror screws?I want to buy the cnc mirrors the change but i dont know how many mm for the screw,and which mirror screw is clockwise,which is counter-clockwise,thx all fds a lot ^V^

Why not take one of them off and measure it?

[Alock]

It's 10mm for the PCX.

[j.d.b.]

The thread on the mirrors is left hand(lord knows why). They use a "gender-changer" adapter to thread it to the handgrip casting, which is right-hand thread. I put different mirrors on that are right-hand thread and left the adapters off, threading them directly into the handgrip castings. I had to get a pair of right-hand threaded nuts for mounting adjustment locking-down. Better?

[homie]

Concerning later model PCX;
Confirm 10 mil bolts, I don't think you will see any lefty threads on 2015/16's rear view mirror mounts. Don't know about early 2014's but apparently the 13's were left and right hand threads

[honkerman]

Personally, I say go for bar end mirrors so you can see more than your shoulders.

[you you]

Personally, I say go for bar end mirrors so you can see more than your shoulders.

But hit cars when filtering and the view is lower.

[honkerman]

Filtering isn't legal here sadly nor anywhere else in the states with the sole exception of California, so this doesn't apply to my own situation. I suppose in places such a thing is legal, bar end mirrors would require heightened awareness on the rider's part.